Hydraulic Extrusion Blow Molding Machine 10L chemical tank with automatic deflashing - MP80D
Hydraulic Extrusion Blow Molding Machine 10L chemical tank with automatic deflashing For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Hydraulic Extrusion Blow Molding Machine 10L chemical tank with automatic deflashing, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
?
Hydraulic Extrusion Blow Molding Machine 10L chemical tank ?with automatic deflashing
?
?
Brief introduction
Hydraulic system design extusion blow molding machine MP80 is suitable for Producing Medium Size Bottles up to 10L of Various Materials, and Equipped with Single Die Head, Double Die Heads, Three Die Heads,? Four Die Heads,Six Die heads.
Adopt four leaders point support structure, it can accept heavy moulds. With parison control system ,it is especially to make bottles below 10 liter ,like toys, auto parts ....
?
Advantage:
?
1. most important for a good EBM machine is the action system and the extrusion system.
?? we& acute;r using powerful hydraulic system design with imported valve and pump for stable action
?? Adopt China famous brand Gearbox along with Delta extrusion motor ,make sure machine runs?? continiously,long life.
?
2. Heavy and stong structure,make sure machine works more faster and stable.
?
3. Special protection for the machine and people
??? Sensor in the operating door: if anybody enter the machine,the electricity conneced with the machine will automatic cut down.
?? Temperature interlock system:When the material inside the barrel is not reaching the setting temperature,the extrusion motor can never start.that will help the screw and head of the machine.
?
4. Special care for different countries.
??? we offer some special design for different countries,in order to matching best performance.
?
5. Easy die head dis-assemble and assemble
?
6. Defleshing function included
?
Center distance introduction:
?
Double head standard Center distance:180mm (160-200mm optional)
Thriple head standard center distance:120mm(100,,125,130mm option)
Four head standard center distance:100mm(90mm as option)
Six head standard center distance:70mm
?
Machine specification:
- - - -
| | MP80D |
Material | | PE,PP,(PVC,PA)OPTION |
Max container capacity | L | 10 |
Number of die | set | 1,2,3,4,6,8 |
machine Dimension(L×W×H) | M | 3.82×2.54×2.5 |
Total? weight | ton | 4.5 |
Clamping force | kn | 120 |
Platen opening stroks | mm | 220-620 |
Stroke of mould board | mm | 400 |
Platen size | mm | 420×520 |
Max mould size(W×H) | mm | 480×500 |
Mould thinkness | mm | 225-300 |
Screw diameter | mm | 80 |
Screw L/D ratio | L/D | 24 |
Plasticising capacity | kg/h | 85 |
Number of heating zone | zone | 4 |
Extruder heating power | kw | 18.5 |
Power of screw-bar machine | kw | 0.22 |
Extruder driving power | kw | 30 |
Number of heating zone | zone | 2 |
Power of die heating | kw | 13.5 |
Max die-pin diameter | mm | 180 |
General power of machine? | kw | 73.7 |
Power of the electric motor of oil pump | kw | 9.5 |
Air pressure | Mpa | 0.6-0.8 |
Average energy consumption | kw | 35 |
Using quantity of compression air | m3/min | 1.5-2.5 |
Using quantity of cooling water | m3/min | 3.0-5.0 |
- - - -
?
Machine parts photo:
This 4 die head blow pin tip,for long narrow neck design bottle.with chiller water tip cooling system
Electric drive hot cutter install on side of the machine for open the parison,best for container with off-center neck
VAINO INTERNATIONAL LIMITED
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China, Ningbo, Zhejiang, China, 315000
Tel: 86-574-88054805
Ningbo Qiming Machinery Manufacturing Co.Ltd. was founded in 1998,it is a modern specialized enterprise in production of extrusion blowing molding machinery and injection molding machinery. Located in a world famous manufacturing center--Ningbo High Tech Economic And Technological Development Zone.
Vaino international limited is the sub marketing company especially do the marketing ,offer service for injection molding machine , blow molding machine with accessories along with the solutions for packing,labeling ....
Our customer covers more than 30 countries and areas all over the world.
With the effort of the whole company, our team become very professional in technical supporting ,pre-service and aftersales service.
We guarantee 48hrs service and fast response and we believe that Promise and responsibility is the most important thing in every business section.
Top-quality,professional services,honest in trustworthiness.we are willing to carry out policy of superiority supported each others,to own the resoure mutually.Two-winners for development,and as always to create the brilliantness of future with the customers hand in hand!
Related Products
