Welding & Solders

CNC Hybrid Press Brakes


█ General Features:


? Servo pump press brake reply on positive&reversible turning of servo motor to control oil interchange of dual-pump,Website:http://www.ahycnc.net, reduce resistance loss of reversing valves and pressure loss.


? When idle running, servo motor will control the speed rates of pump, which will get Min power consumption of idle bending.


? When start servo motor, pump can running with almost no pressure and oil flow, very small starting power.


? When in approach and dwell time,if the system pressure meet setting pressure value, dual-pump will provide reason pressure and flow, DELEM CNC controller will give servo motor corresponding speed rates order according to needed speed and pressure, so the whole hydraulic won’t have overflow loss.


█ Advantages


? The Fastest: 18-20 mm/sec bending speed, approach can reach 220mm/s, return speed 200mm/s.? It is a fast operating press brake using servo motors and highly efficient pump.


Eco – Friendly ? The new series press brakes are eco-friendly using comparably less energy than a standard press brake.? An average 65% energy saving when used in comparison to standard press brakes.


? Reduced oil level: 70% ? Bending efficiency
?Highest bending efficiency is achieved as no pressure is lost through proportional valves.


? Quietest in its class: 63db ? 3x longer system life time
?System and pump have 3 times longer lifespan due to high quality components and smart running technology.


? Oil does not heat up
?Oil is more durable than ever because the oil does not heat up , as the pumping system which does not run when the machine is at stand-by mode.


? Ease of maintenance
?Y1 and Y2 axes have stand-alone oil tanks. Maintenance is conducted only when required making the machine easy to maintain.


? Energy Consumption


95% less while idle between bends.


50% less during free fall.


At least 50% sa