Non-metallic Mineral Products

YH-978 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,Website:http://www.organophilic-clay.com,medium and high polarity.1.Advantages:☆ High gelling efficiency over low to medium polarity organic liquids,especially in toluene, xylene, 200#solvent oil, naphtha and other aromatic and aliphatic compound.☆ Consistent in rheology and thixotropy development.☆ Good anti-sagging property and anti-sediment property.☆ Easy of dispersion2.Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )whiteFree Flowing Powder1.5g/cm3≤3.5%≥98%≤38%3.Typical Applications:●Alkyd paint●Adhesive●Solvent epoxy paint●Inks(mineral oil)●Polyester paint●Inks(Nitro)●Chlorinated rubber paint●Adhesive●Marine paint●Silica paint4.Incorporations:YH-978 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay,YH-978 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.It can also be added while grinding or after grinding without polar activator. If add it into low polar solvent systems first, better performance can be expected. Meanwhile, high speed shear can also imrove the dispersion greatly.5.Recommended Levels:The amount of YH-978 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.3%-2.5% based on the total formulation weight.6.International Countertypes: Bentone?SD-1,Claytone?AF ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. The products discussed are sold without warranty, express or implied, includin