Machinery & Equipment

JAW CRUSHER As the professional crusher manufacturer and supplier, Gong Yi HSM Heavy Machinery Co., Ltd has developed new type crushers to meet the increasing demand in domestic and foreign market. And we have to know the correct using method, so as to prolong its service life. Then let us get some knowledge about the operating rules of the jaw crusher.
1. Preparation before Starting
(1) Check lubricating of main bearings; check whether the toggle plate and movable jaw, underlay of upper toggle plate can work well, and whether there is enough lubrication between toggle plate and underlay of upper toggle plate.
(2) Check whether all fixed parts are well fixed.
(3) Check whether the weight center of flying wheel and groove wheel is all right. The weight center should be in line with eccentric shaft through the central hole of main bearings.
(4) Check whether the belt is installed well and replace with a new one if it is worn. Clear the belt wheel and groove wheel with clean cloth if there is any oil stain on them.
(5) Correct the protecting devices if there are not in good condition.
(6) Check whether there are any materials in the crushing groove and clear it.
(7) Check whether the gasket is installed correctly or pressed tightly.
2. Starting of crusher
(1) Start the machine only after making sure that the machine and transmission part can work in good condition.
(2) This machine can only start in no -loading condition.
(3) Stop the machine immediately if any uncommon phenomena occur. Start the machine only after checking and correcting.
Welcome to visit my web site
http://www.050909.com http://www.hsmmachinery.com http://www.rollscrusher.com