How To Install a Kitchen Faucet, Installation Tips
1. Installation of single-hole basin faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the drain port. Currently, most of the water inlet on the market is hard pipe water inlet. Pay attention to the reserved water pipe height. It is best to leave about 30 meters from the basin down. When installing, you must choose a special angle valve, and the angle valve must be fixed to the hot and cold water pipes on the wall. If there is a distance between the angle valve and the water pipe on the faucet, you need to buy a special pipe to lengthen the connection. How to save money on decoration? Go to the home improvement website for free design, budget and quotation. Other water pipes cannot be used for connection, otherwise it will leak and fall off due to high water pressure. If the water inlet pipe is too long and exceeds the water outlet pipe, just cut off the excess.
2. Installation of single-hole kitchen faucet
Since the kitchen faucet is used frequently and is easy to loosen when moved around, it is natural to require stability, so the locking nut must be tightened. At present, there are a number of faucets in the building materials market that are screw pipes fixed with enlarged nuts, which have a superb stability effect. The obvious effect will become the trend of a generation of fashion.
3. Installation of thermostatic faucets
Before installing thermostatic faucets, check which side of the water pipe is cold water and which side is hot water, especially the wrong connection of hot and cold water pipes, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use thermostatic faucets, mainly because the water pressure is too low. When installing thermostatic faucets, you must also install hot and cold water filters.
4. Installation of shower and bathtub faucets
If you buy shower, bathtub, or wall-mounted faucets, you need to choose a suitable height to bury the outlet pipe. The distance between hot and cold water pipes is about 20 meters or more. Rinse the water pipes before installation to avoid damage to the faucet due to hard water. Concealed shower and bathtub faucets: After purchasing concealed faucets, the valve core of the faucet is generally buried in the wall. Before burying, the thickness of the bathroom wall should be considered. If the wall is too thin, the valve core will not be able to be buried. When burying, do not remove the plastic protective cover of the valve core easily to avoid damage to the valve core by cement and other chores during burying. In addition, when pre-burying the valve core, you should also pay attention to the up and down, left and right directions of the valve core to avoid burying the valve core incorrectly.
