Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial, China Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial Supplier

Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial - HI-P268

Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.

?

?

Horizontal Fully Automatic PET Preform Injection Molding Machine For Industrial

?

?

Quick Detail:

?

HI-P268 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 268tons, real shot weight 1100g.

Machine main components adopt world famous brand, e.g.:
? Controller:TECHMATION (TAIWAN),
? Low voltage contactor: SCHNEIDER(FRANCE),
? Low voltage air switch: SCHNEIDER(FRANCE),
? Proportional Valve: Dofluid HNC(TAIWAN)
? Oil pump: VICKERS(USA)
? Directional Valve: VICKERS(USA)
? Induction travel switch: OMORON (JAPAN)
? Inductor potentiometer: FORT(USA)

?

?

?

Description:

?

HI-P268 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 18g-600g, neck size 15mm to 120mm.

HI-P268 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
?

?

Applications:

?

Available mold cavities on HI-P268 PET Preform Injection Molding Machine:

For PET perform 18g-20g, 15mm-20mm, mold cavity can be:? 8-Cavities, 12-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,

For PET perform 16g-48g, 28mm PCO, 25mm/30mm, 38mm, mold cavity can be:: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,

For PET perform 50g-500g, 45mm oil neck, 60mm-120mm wide mouth, mold cavity can be:: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities,

?

?

Specifications:

?

HI-P268 Technical Parameters

- - - -
HI-P268 | Parameters (Special design for PET) |
TECHNICAL PARAMETER TABLE | Unit |
INJECTION
UNIT | SCREW DIAMETER | mm | 70 |
SCREW L/D RATIO | L/D | 25 |
SHOT VOLUME(THEORETICAL) | cm3 | 1100 |
INJECTION WEIGHT(PET) | g | 1166 |
INJECTION PRESSURE | Mpa | 147 |
INJECTION RATE | g/s | 380 |
PLASTICIZING CAPACITY | g/s | 60 |
SCREW SPEED | rpm | 0-190 |
CLAMPING
UNIT | CLAMP FORCE | Kn | 2680 |
OPEN STROKE | mm | 550 |
MAX.MOULD HEIGHT | mm | 600 |
MIN.MOULD HEIGHT | mm | 230 |
SPACE BETWEEN TIE BARS | mm | 570×570 (W×H) |
EJECTOR FORCE | Kn | 65 |
EJECTOR STROKE | mm | 150 |
GENEREL | EJECTOR NUMBER | n | 9 |
PUMP PRESSURE | Mpa | 16 |
PUMP MOTOR POWER | KW | 30 |
HEATING POWER | KW | 21.5 |
MACHINE DIMENSION | m | 6.1×1.5×2.2(L×W×H) |
MACHINE WEIGHT | T | 8.0 |
Hopper Capacity | L | 50 |
Oil Tank Capacity | L | 580 |
- - - -

?

?

Platen size(facing):

?

?

?

Platen size(aside):

?

?

?

Competitive Advantage:

1. This machine adopt special PET screw, prolonged screw and barrel will ensure PET plasticizing effect, to make performs with good brightness and transparence, the production is with low defect.
2. Increased oil pump’s power
3. Increased heating ring’s power
4. Heaters adopt ceramic, the using life is double than stainless steel.
5. Machine with oil filter system to ensure hydraulic oil clean , to prolong action valves using life.?
6. The machine equipped with 7 inch colorful screen controller, brand Techmation from Taiwan, the controller is with several languages include English, French, Spanish, Portuguese, Russian, Arabic etc.
7. The machine equipped with hydraulic protection
8. The machine equipped with double Hydraulic pulling device
9. The machine equipped with double Air Ejector
10. The machine equipped with single slots on the mold plates,

?

?

Special designed points for PET(for HI-P series injection molding machine)

Characteristics of PET resin

1. melting point: 250℃-260℃, molding temperature scope of PET is from 255℃-290℃, improved GF-PET can reach 290℃-315℃.

2. Low viscosity degree.

3. Strong moisture absorbing ability.

Our machine’s special design for PET

L/D:25, this is the standard parameter of our PET series injection molding machine.
Enlarged screw diameter and length.
Increased oil pump’s power.
Increased heating ring’s power.

?

?

?

?

Get Quote

Hisson Plastic Machinery Co. Limited

Address: Room 705, No.2-6, Green Life Square, Simingzhong Road, Yingzhou, Ningbo, China., Ningbo, Zhejiang, China, 315000
Tel: 86-574-87170279
Hisson Plastic Machinery Co.,Ltd. was established in 1996, is located in Ningbo, which is the second largest deep-water seaport in China. We are one of the leading manufacturers and exporters of PET machinery and other kinds of plastic machinery in china. We offer clients from a single machine to a complete production line, our main products include: >> HB-M series PET bottle semi-auto stretch blow molding machine >> HB-A series PET bottle automatic stretch blow molding machine >> HI-P series PET preform injection molding machine >> HI-G series Plastic products injection molding machine >> PET bottle blow mold >> PET preform Injection mold >> Other kind of plastic products injection mold >> Auxiliary equipment for PET bottle blowing >> Auxiliary equipment for preform injection >> Extrusion blow modling machine, extrusion blow molds and accessories. Also we provide turkey solution aiming at client's specific requirement, our advanced technology and abundant experience ensure us to offer you reliable and economic production line. In order to supply high quality products, we constantly adopt up to date technology and advanced equipments, we purchased the tooling center, numeric-controlling equipment, measuring and testing instruments and other equipments from overseas, such as Japan, America and Germany. And, our designers are using AutoCAD system, ProEngineer system, Solidworks system etc.. Just because we adopted advanced equipments and advanced aided design software, the parts of our machine could be guaranteed at high precision and quality. As our focus is continuously providing high quality products and excellent service, Hisson has proved to be reliable supplier and partner.