Air-compressing & Air-separation

?

High Resoluction Electromagnetic Flow Meter Corrosion Resistance Wearability
?


The reason for choosing us.


1). Explosion-proof design accords with the national explosion proof technology

requirements and has benn approved by tests by tests in various explosion-proof

places.


2). It,s high resistance, fast response design can make undistorted collection of

weak signal and fast response to the flow changes. Its range rate can reach 100:1.


3). It has the function of low conductivity measurement.


4). It is the first domestic company that tests full or empty pipe


by adopting capacitance technology, which can avoid wrong alarms.


5). It has the consistency of converter’s interchange, which can avoid input

parameters repeatedly.


6). Wide range of power supply mode is available

?

?

?

Instrument detection and maintenance

?

?

Electromagnetic flow converter has self-diagnosis function. In addition to the

?

power and hardware circuit fault, The system also give alarm to other faults

?

in general usage. These information are given accordingly prompts in the

?

lower right of the screen.

?

?

1, Maintenance and repair

?

a) Sensor installation site should be consistent with the section four

requirements, Please keep the housing clean and tidy;

?

b)Transmitter should be placed in a clean, ventilated, dry place;

?

c)Need to inspect every two years, for high precision users, instrument

need to be submitted to censorship.

?

2, Transportation, storage

?

a)The instrument must be packed before transportation, be carefully

handled when loading and unloading.

?

b)Storage site must be dry, ventilated, avoid corrosive gas erosion, the

ambient temperature is not too low or too high;

?

c)Storage time better not exceed three years.

?

3, Unpacking and checking

?

a) The packing can’t be opened with heavy hammer, and should be

?

?????????? careful not to damage the instrument

?

b) Check the content carefully according to the packing list.

?

?

?

Specification choosing

?

- - - -
Type of instrument | MTF | ? |
Installation form | -S | Flange-type sensor |
-D | Clamping-type sensor |
-C | Insertion-type sensor |
Pipe diameter | 15 | 15mm |
20 | 20mm |
25 | 25mm |
.... | .... |
2400 | 2400mm |
Electrode form | -F | Standard and fixed type |
Electrode material | A | Stainless steel 316L |
B | Hb |
C | Ta |
D | Ti |
E | Hc |
F | Tungsten Carbide |
G | other |
Lining material | R | Rubber |
P | PTFE |
O | Please mark out others |
Measuring pipe material | B | 304 Stainless steel (Standard) |
C | 316 Stainless steel |
Flange Material | A | 304 stainless steel |
B | 316 Stainless steel |
C | 20# Carbon steel |
Cover Material | D | Cover 304 stainless steel |
E | Cover 316 Stainless steel |
F | Cover Carbon steel paint (Epoxy metallic paint) |
Installation material flange | 0 | Without matching flange |
1 | With matching flange |
Ground ring | 0 | Without ground ring |
1 | With ground ring |
Rated voltage | -10 | 1.0MPa |
-16 | 1.6MPa |
-40 | 4.0MPa |
- - - -

? ? ? ??

?

?

?

Company service:

?

METLAN is always your reliable strategic partner.To be the best is our pursuit;perfect is our

?

motivation;quality products and perfect service is our name card.With strong belief and sense

?

of responsibility,continuing the business and creating the new field in measurement & control

?

instrumentation area.

?

We promise to keep your long interest and offer relative training skills to your all operational

?

support,and to lead Metlan into your industry.