Assembly Line & Production Line

Compact Type Electromagnetic Flow Meter with carbon steel flange
?
?
Introduction:
????MTF?electromagnetic?flow?meter,?composed?of?sensor?and?converter,?works?based?on?

Faraday’s?law?of? electromagnetic?induction.?It?is?used?to?measure?electrical?conductivity?of?

liquid?or solid.?Generally,?the electrical?conductivity?should?be?over?5υS/cm(electrical?

conductivity?of tap?water,?raw?water?is?about 100～500υS/cm),It?can?also?be?used?to?measure?

various?mediums?like acid,?alkali,?saline?solution,paper pulp,ore?pulp?and?so?on.But?these?

mediums?can’t?contain a?lot?of?magnetic?materials?and?bubbles.

?

?

Application:


MTF?electromagnetic?flow?meter?is,?a?kind?of?instrument,used?for?measuring?the?flow?

conductivity?liquid, which?is?widely?used?in?flow?measuring?of?Metallurgy, Chemical?

industry, Paper?industry,?Environmental protection,?Oil?industry,?Textile?industry,?Food?

industry?and?City?administration,?Water?works,etc.
?
?
Instrument detection and maintenance


Electromagnetic flow converter has self-diagnosis function. In
addition to the power and hardware circuit fault, The system also give
alarm to other faults in general usage. These information are given
accordingly prompts in the lower right of the screen.


1,Maintenance and repair


a) Sensor installation site should be consistent with the section four
requirements, Please keep the housing clean and tidy;
b)Transmitter should be placed in a clean, ventilated, dry place;
c)Need to inspect every two years, for high precision users, instrument
need to be submitted to censorship.


2,Transportation, storage


a)The instrument must be packed before transportation, be carefully
handled when loading and unloading.
b)Storage site must be dry, ventilated, avoid corrosive gas erosion, the
ambient temperature is not too low or too high;
c)Storage time better not exceed three years.


3,Unpacking and checking


a) The packing can’t be opened with heavy hammer, and should be
careful not to damage the instrument
b) Check the content carefully according to the packing list.

?

?

- - - -
MTF
Electromagnetic
flow?meter | | | | |
Divided type | Integrated?
type(IP67) | Explosion-
proof?
integrated | Battery
powered??
type | Heat(energy)?type |
Accuracy | ±0.2%??or?±0.5% |
Diameter | DN15~dn2400 | DN15~DN600 | DN25~DN1400 |
Flange | Comply?with?GB9119?Standard?carbon?steel(stainless?steel?is?optional) |
Pressure | DN15~DN1600?1.0,
1.6,2.5,4.0MPa?
DN700~DN2400?0.6,
1.0,1.6MPa | DN15~DN600?1.0,
1.6,2.5,4.0MPa | DN15~DN600?1.0,1.6,2.5,
4.0MPa?DN700~DN2400?0.6,
1.0,1.6MPa |
Please?consult?us?if?you?need?special?pressure |
Liner | PTFE,PU,CR,PFA,F46,IR |
Conductivity | ≥5μs/cm(Please?consult?us?if?it?is?less?than?≥5μs/cm) |
Electrode | 316L,Hastelloy,Ti,Ta,PT-It |
Protection?Level | IP67(For
sensor,?
IP28?is?
optional) | IP67 | IP67 | IP68 | IP67??IP68 |
Medium?Temperature | -25℃~180℃
(Please?
refer?to liner
?material) | -25℃~80℃(Please?
refer?
to?liner?material) | -25℃~180℃
(Please?refer?to
?liner?material) |
Influence?of?Ambient
?temperature | -25℃~60℃<±0.1%/10℃?or<±0.25%/10℃ |
Repetition | ≤±0.1%,±0.25% |
Analog?output?Error | ≤±0.02mA |
Current | ≤20m/s |
Electrical?connection | M20*1.5seal,G1/2,NPT1/2 |
Output?interface | Standard?output(4~20mA),Pulse?output,RS485,HART,Profibus-PA |
- - - -

?