Electronics Stocks

Hot Runner Heaters with Thermocouple J

?


1. Hot Runner Heaters Brief Introduction


Wuhan Global Metal hot runner heaters use Germany heater wire, United States high-purity magnesium oxide material, and strict process technology. There are various ?cross section and size for choice, such as square, round and flat, provide high-performance electric heater for heating hot runner mold and other fields.


Heater maximum temperature up to 650 oC, the integration of temperature thermocouple for the precise temperature control, can provide K, J, E thermocouple, blasting and blackening surface treatment, also can provide bright surface.


2. Hot Runner Heaters Characteristics


a. Very good performance of the heating uniformity in the heating area.
b. The inside insulated cover, same as the German GC.
c. High insulation (more than 500M ohm) and high pressure resistance (1000V above), can meet special requirement if customers need.?
d. The moisture-proof can be IP65, suitable for working in bad condition.


3. Hot Runner Heaters Parameter.

?
# Standard Configuration
# Material :304
# Unheated length(L1):45mm
# Connector(cold side)(D1xU): Ф3.5x40mm
# Power lines,grounding wire length(L):1000mm
# Surface treatment:sandblasting;

- - - -
Spring?coil?heater?(H?series) | 3.0x3.0
3.3x3.3
4.0x2.0
4.2x2.2
4.5x2.7 | Φ3.0 | Φ4.0 | Φ5.0 | 3.5x3.5
4.0x4.0 | 5.0x5.0 |
Voltage | 220V,230V,240V |
Power?tolerance?115W-200W | +/-10% |
Power?tolerance??201W-2000W | +5%-10% |
Out?jacket?length | 30mm~280mm |
Diameter?of?the?inner?sleeve/wrapped?diameter | 10mm~42mm |
Unheating?length | 45mm |
Max?power?density | 9W/cm2 |
Heating?Length?tolerance | +/-0.05mm |
Unheating?length?tolerance | +/-2.5% |
Tolerance?ID?d?≤20mm | Without?inner?sleeve:-0.15mm
With?inner?sleeve:0.05mm~0.10mm |
Tolerance?ID?d?20mm~30mm | Without?inner?sleeve:-0.20mm
With?inner?sleeve:0.05mm~0.10mm |
Tolerance?ID?d?≥30mm | Without?inner?sleeve:-0.25mm
With?inner?sleeve:0.05mm~0.10mm |
Tolerance?cross?section | +/-0.15mm | +/-0.20mm |
Thermocouple | K,J,E | None |
Material | 304,321,316 |
Maximum?working?temperature | 650℃ |
Die?electrical?strength | 800V | 1000V |
- - - -

?

4. Hot Runner Heater Application


This hot runner heater is widely applied for hot runner system, plastic industry, packaging machinery, medical equipment, casting process,other electric heating industry, etc..

?

5. Packing Information.

?



?

6. Transportation.



?