Electrical Product Agents

HDMI Signal Extender all to HDMI with HDBaset 100m Cat6 Extender

?

?Introduction

?

This machine is a high ? performance presentation scaler and switcher . It accepts one of eight inputs : one DVI , two VGA , one composite video and four HDMI signals . The HDMI1, HDMI2 to bypass the input function , supports input resolutions up to 4K x 2K @ 30Hz , and HDMI3 , HDMI4 , DVI ,?VGA1 , VGA2 , CV scales the video , supports output resolutions up to 1920 x 1080P @ 60Hz . It scales the video , embeds the audio , and simultaneously outputs the signal to HDMI and HDBaseT output , HDBaseT output transmission distances up to 328ft / 100m ( 100m Version ) through CAT5e / 6 / 7 cable , together with S / PDIF and stereo audio outputs . Flexible control mode diversity , through the front panel button , remote control , RS - 232 and TCP / TP control .

?

Features :
# HDMI , HDCP and DVI compliant .
# The HDMI1 , HDMI2 to bypass the input function , supports input resolutions up to 4K x 2K @ 30Hz .
# The HDMI3 , HDMI4 , DVI , VGA1 , VGA2 , CV scales the video , supports input resolutions :
# # HDMI : 480i to 1080p
# VGA : 1920 x 1080P @ 60Hz , 1360 x 768P @ 60Hz , 1280 x 1024P @ 60Hz ,1024 x 768P @ 60Hz ,1280 x 720P @ 60Hz ,1280 x 768P @ 60Hz ,?800 x 600 @ 60Hz , 640 x 480P @ 60Hz
# CV : Supports PAL , NTSC3 . 58 , NTSC4 . 43 , SECAM , PAL/M , PAL / N standard TV formats .

# Supports transmission distances up to 328ft/100m (100m Version ) through CAT5e / 6 / 7 cable
# Supports POE function
# VGA video supports YPbPr and RGBHV
# Picture Adjustment Settings
# Supports embeds the audio
# Supports S / PDIF and stereo audio outputs
# Supports HDBaseT LAN Serving function
# The USB and RS - 232 for the firmware update
# Supports RS - 232 , remote control , on - panel control and TCP / IP Control
# Supports smart EDID management

Specifications :

- - - -
# Input Ports | # 4 × HDMI , # 1 × DV , # 2 x VGA , # 1 x RCA , # 1 × RS - 232 , # 1 x RJ - 45 ( Control ) , # 1?x IR IN , # 7 x 3P captive screw connector ( 3 . 81mm ) , # 1 x USB |
# Output Ports | # 1 × HDMI , # 2 x RJ - 45 ( LAN ) , # 2 x RCA , # 1 x RJ - 45 ( HDBaseT ) , # 8 x IR OUT |
# Input Resolutions Support | # Up to 4K x 2K @ 30Hz |
# Output Resolutions Support | # Up to 4K x 2K @ 30Hz ( HDMI BYPASS ) # Up to 1920 x 1080P @ 60Hz ( SCALER ) |
# Control | # IR , # RS - 232 , # TCP / TP , # Buttons |
# ESD Protection | # Human - body Model : # ± 8kV ( Air - gap discharge ) # ± 4kV ( Contact discharge ) |
# Power Supply | # 24 V / 1 A DC # ( US / EU standards ,?CE / FCC / UL certified ) |
# Dimensions | # 440 mm ( W ) × 200 mm ( D ) × 45 mm ( H ) |
# Weight | # 2300g |
# Chassis Material | # Metal |
# Silkscreen Color | # Black |
# Operating Temperature | # 0 oC ~ 40 oC / 32 oF ~ 104 oF |
# Storage Temperature | # ?20 oC ~ 60 oC / ?4 oF ~ 140 oF |
# Relative Humidity | # 20 ~ 90 % RH ( non - condensing ) |
# Power Consumption | # 14 . 5 W ( Max ) / 1 . 8W ( Standby ) |
- - - -

?

?Package Contents :

?

- - - -
# l ALL to HDMI with HDBaset 100m Cat6 Extender | # 1pcs |
# l HDBaseT Receiver | # 1pcs |
# l 24V / 1A DC power adaptor | # 1pcs |
# l Operation Manual | # 1pcs |
# l Wideband IR Tx cable | # 9pcs |
# l Wideband IR Rx cable | # 2pcs |
# l Scaler Switcher IR Remote | # 1pcs |
# l Mounting ears | # 2pcs |
# l RS232 cable | # 1pcs |
- - - -

?

PANEL FUNCTIONS

?

?Front Panel

?



Part 1 . IR : IR Receiver window ( accepts the remote control signal of this device only ) .

POWER : Press this button to power the device standby on / off . Press this button more than 2 seconds , the device has reached the standby mode . The LED will illuminate green when the power is on , red when it is in & acute; Standby & acute; mode .

?LOCK : Press this button to lock all the buttons on the panel, press again to unlock .

?AUDIO SELECT : Press this button to select audio from digital ( INT )?or analog ( EXT ) ,When the signal is HDMI input .

Note : DVI interface as HDMI input has the same function.

?Part 2 . HDMI INPUT BYPASS : Press these buttons to switch directly to the required source . An LED will illuminate to indicate the selected input source .

Part 3 . SCALER SELECT :

Source select : Press these buttons to switch directly to the required source . An LED will illuminate to indicate the selected input source .

Picture adjustment : Press scaler or auto adjust button to adjust the output picture .

Note : a . When the signal source for VGA ( RGBHV ) input , auto adjust button is valid .

b . Scaler adjust the step : six steps?

Resolution select : Press the button to select different resolution output . An LED will illuminate to indicate the selected resolution .

?

Rear Panel :

?



Part1 : OUTPUT

The HDMI OUTPUT connect to HDMI equipped TVs or monitors and the HDBT OUTPUT connect to the HDBT Receiver . The coaxial and stereo output is connected an audio amplifier . The LAN is connected to PC or Router .

Part2 : INPUT

1) HDMI 1 / 2 / 3 / 4: Connect to HDMI sources such as DVD player / Blu - ray player for both video and audio signal conversion .

2) DVI : Connect to DVI sources such as PC .

3) VGA 1 / 2 : Connect to a PC / Laptop source for video signal input with a D - Sub 15pin cable or connect to a DVD player source for video signal input with a D - Sub 15pin to 3 RCA adaptor cable .

4) CV + L / R: Connect to a composite video source such as a video / DVD player for both video and audio signal conversion .

5) 3P captive screw connectors ( 3 . 81mm ) :Connect to source’s L / R output with 3P cable for audio signal conversion.

Part 3: IR OUT

Connect with the supplied wideband IR TX .

Part 4: CONTROL

1) TCP/IP: This port is the link for TCP / IP controls , connect to an active Ethernet link with an RJ45 terminated cable .

2) RS232(DB9): Connect to a PC or control system with D - Sub 9 - pin cable for the transmission of RS - 232 commands .

Note: The RS - 232 interface can control the machine .

3) IR IN : Connect with the supplied wideband IR RX .

4) RS232 ( 3 . 81mm 3P captive screw connector ) :?Connect to a PC or control system with a D - Sub 9pin to 3P cable .

Note : The RS - 232 interface only with the remote receiver ( HDBaseT Receiver ) RS - 232 communication.

Part5 : UPDATE PORT

Connect U flash drive , system software update .

Part6 : DC POWER INPUT

Plug the 24V / 1A DC power supply into the DC24V power in .

?

Remote Control

?



?

5 .?Resolution select: Press these buttons to select different resolution output .

6 . hese buttons for function extension keys .
? Serial Control


IR Control Operations

The example , illustrated in Figure 3 and Figure 4 :

?

To control far-end display : Figure 3

?



Control local device (?DVD?, Switcher , etc ) from remote :?Figure 4

?



?

IR Cable Pin Assignment , illustrated in Figure 5 :

?





?

HDBT Receiver

?



PC controller user guide :





Note :

1 . The HDMI1 / HDMI2 support EDID management mode :

The EDID mode table :

- - - -
# EDID Mode | # EDID Description |
# 1 | # 1080i , 2CH AUDIO |
# 2 | # 1080i , DOLBY / DTS 5 .1 |
# 3 | # 1080i , HD AUDIO |
# 4 | # 1080p , 2CH AUDIO |
# 5 | # 1080p , DOLBY / DTS 5 .1 |
# 6 | # 1080p , HD AUDIO |
# 7 | # 3D ,1080p , 2CH AUDIO |
# 8 | # 3D , 1080p , DOLBY / DTS 5 . 1 |
# 9 | # 3D , 1080p , HD AUDIO |
# 10 | # 4k * 2k , 2CH AUDIO |
# 11 | # 4k * 2k , DOLBY / DTS 5 .1 |
# 12 | # 4k * 2k , HD AUDIO |
# 13 | # DVI 1024 x 768 |
# 14 | # DVI 1920 X 1080 |
# 15 | # DVI 1920 X 1200 |
# 16 | # Copy from HDMI OUTPUT |
# 17 | # Copy from HDBT OUTPUT |
- - - -

?

The HDMI3/HDMI4/DVI support EDID management mode

?

The EDID mode table:

?

- - - -
# EDID Mode | # EDID Description |
# 1 | # 1080i , 2CH AUDIO |
# 2 | # 1080p , 2CH AUDIO |
# 3 | # DVI 1920 X 1080 |
- - - -

?

EDID . What is it and what is it used for ?

Under normal circumstances , a source device ( digital and analog ) will require information about a connected device/display to assess what resolutions and features are available . The source can then cater its output to send only resolutions and features that are compatible with the attached device / display . This information is called EDID ( Extended Display Information Data ) and a source device can only accept and read one EDID from a connected device/display . Likewise , the source an only output one resolution for use by a connected device/display .

?

? ? ? ? Switch page

?



?

FW upgrade page

?



?

Operate and Connect

?



Connect a computer ( YPbPr ) or RGBHV source to the VGA1 / 2 IN video input D - Sub 15pin HD connector . You can connect the audio signal via the AUDIO IN VGA1 / 2 3 . 81mm 3P captive screw connector.



?

?