Electronics Agents

80KV~225KV Micro-focus X-ray Inspection System with Focus Size 2μm~0.22mm
?
Parameters
- - - -
Max.Tube Voltage | 225KV |
Max. Power | 320W |
Focus Size | 2μm~0.22mm |
Detail Resolution | ＜1μm |
Spatial Resolution | 0.5% |
kV Adjustment | 20——225kV |
mA Adjustment | 0.05——1.4mA |
kV Resolution | 1kV |
mA Resolution | 0.01mA |
Output Current Stability | 0.005% |
mA Accuracy | <0.05% |
RF Frequency | 100KHz |
Cable Connector | R12 |
- - - -

?
?


?
Product Features
?
X-ray systems basically consist of a sealed or open X-ray source, a fixture for holding and manipulating the sample to be inspected, and a radiation detector (Figure 1). X-ray tubes are available in various configurations and differing performance capabilities. Open microfocus tubes (a stainless steel tube that can be opened at any time for cleaning and maintenance, and is always evacuated prior to each use) are used in high-resolution applications of electronics assembly and packaging. Such tubes can provide a spatial resolution of less than 1 μm, with geometrical magnifications of as much as several thousand times. High-voltage generator. A high-voltage generator provides the required power for the electronics emitting from an electron gun within the X-ray tube, controls, computers and image-processing software. The basic components are arranged in an X-ray room or installed in a radiation-shielded cabinet. Manipulator. An X-ray system& acute;s “manipulator” is used for high-precision x-y-z positioning and rotating/tilting of samples. The manipulator should be capable of directional and rotational speeds for requirements ranging from quick overview searches at low magnification to very low speeds at high magnification. For example, x-y speeds may range from a few micrometers per second to several hundred millimeters per second. ? System Components
?
Digital high frecluency high voltage generator Microfocus X-ray tube 4”image-amplifying device Computer image processing system Five-axis mechanical lransmission system
?

?

?



?
Application
?
a) BGA Inspection b) Inspection of over molded electrical connectors c) Encapsulated components d) Aluminum die castings e) Molded plastic components f) Ceramics g) Aerospace components h) Electrical / mechanical components i) Electronic components j) SMT assemblies k) Pharmaceuticals l) Automotive assemblies m) Agriculture n) Counterfeit inspection o) Cell phone battery inspection
?

?



?
Sample product
?

?
An X-ray Fluoroscopic inspection system for observing and inspecting internal structures and mounting conditions in electronic devices
Combining a high-output, high-resolution new-model X ray system with a high-resolution flat panel detector produces distortion-free, faithful images
Flexibly designed inspections with Teaching Function and Step Feed Function
In pursuit of high-functionality, easy to use software
Spatial resolution: 1 μm
Maximum sample size: 470 mm × 420 mm × 100 mm, max. 5.0 kg
Inspecton stroke: X: 460 mm; Y: 410 mm; Z: 100 mm, Rotation: ±180°, Tilt: 70°
X-ray output: Max. tube voltage 160 kV; tube current: 200μA; rated output 21 W
Detector: Flat panel detector
System magnification: 8,700 times
Power supply: single-phase 220 V AC ±10%, 2 kVA,
Weight approx: 2,400 kg
?