Active Components

High CRI Bi Color LED Photography Lights For Indoor / Outdoor Shooting
?
What& acute;s?Includied

?

- - - -
?Accessories Name and Model No. ?Quantity
4400mAh Lithium battery | 2 |
Battery charger and adapter | 1 |
AC adapter and power cord | 1 |
?Ball head CA109A | 1 |
Diffuser | 1 |
carrying bag | 1 |
- - - -

?
?


Product Characteristics
?
??LED508AS is composed of 204 pcs of white and 204 pcs of warm?LEDs.?LED& acute;s?lifetime?reach 50000 hrs.
?? Delicated design,compact,light-weight and convenient to carry.
?? It is heat free and remains consistent even as the battery voltage does down.It produces soft,bright?light ray with?standard color temperature daylight or tungsten.
?? Dimmable from10% to 100%,flicker-free.
?? It is suitable for indoor and outdoor photography and videography,portrait??photography and wedding? photography,especially good for children? photography.
???LED508AS is absolutely flicker-free and optionally adjustable from 3200K all the way to 5600K.It can definitely satisfy users& acute; demand for color temperature.
? Runs on AC adapter or battery.
?
?


Product?Specifications?
?

- - - -
?Model | ? LED508AS |
?LED Type | ? COB |
?LED quantity | ??508 PCS |
?Continuous working ?time | ??Approx 2hrs |
?Power | ??30.5 W |
?Color?termperature | ??3200~5600K (±300K)? |
?Illuminance | ?1280Lux/m (3200K)
?1267Lux/m (5600K) |
?Battery type | ? Rechargeble Lithium battery, 4400mAh, 7.4V |
?Battery life time | ??Charge and Discharge for approx. 500 times |
?Color | ? Black |
- - - -

?
?
?
Operation instructions
1. Install the battery onto the light.Connect the light to camera by the hot shoe.Turn on the power switch and the light works.
2. There is a power indicator light on the back of the light.Turn off the light and press the power test button to check the battery level.
3. The battery level shows as below:
? ??
4. Please adjust the brightness of LED508A.Please adjust both the brightness and color temperature of LED 508A accordingly.
5. The four columns in the front of the light are for attaching a diffuser.You can attach a diffuser and adjust the pillar height to get different soft lighting effect .
6. When the battery runs out,press the installation and uninatallation button to take off the battery.It takes 4-5hrs to recharge it.
?

?

?
?Cautions:?
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
?
2. Please do take off the batteries when in storage.
?
3. Please do not block the louvers,or it may seriously influence LEDs& acute; effect and lifetime.
?
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
?
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
?
6. It is not allowed to drop or impact the light to avoid fire.
?
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a
? ? fire.
?
8. It is not allowed to throw the battery into fire.
?
?
?
Warranty: ?
The LED light is guaranteed for 12 months.
The battery is??guaranteed to be charged and?discharged?for 500 times.
?
?
?