Construction Machinery

?

High Bond Strength Floor Tile Cement Based Adhesive for swimming pool

?

C1TE Tile adhesive is formulated with an advanced acrylic polymer technology. This adhesive offers extended open time for positioning and no vertical slip.
?
?
Product features
?
1. Easy operation
2. Has high bond strength.
3. Be premixed and produced.
4. Has strong water retention.
5. Has good flexibility to withstand shock and vibration. ?????????????
6. Has special formula to reduce material consumption and building load.
7. It is non-toxic, non-flammable, non-radiation, non smell and environmental.
?
?
Scope of application
?

- - - -
YY-112? ? | It is ?suitable to fix various small tiles and mosaic onto conventional substrates,
precast concrete panels, concrete, cement renders/screeds. Both on interior and
?Exeterior wall and floor .
? |
- - - -

?
?
Treatment of base plane
?
1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m ruler, error should be less than 5mm.
3. New plastering cement mortar should be constructed after 14 days maintenances.
?
?
Construction technology
?
▲ Construction tools: leveling instrument, dentiform drawknife (3 x 3mm,4 x4mm,6×6mm,8×8mm,10 x10mm), tile generator, motor stirrer, big drum, cross-colloidal.
▲ Stir and mix: mix tile adhesive and water as 25: (6-6.5), stirs completely and waiting for 5 minutes and stir again.
▲ Lay-up construction: scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m 2 each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
?
?
Attentions
?
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5-40℃.
3. Don’t use the dried paste by re-adding water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
?

- - - -
Use level list |
Tile size | Drawknife size | Use level(kg/sqm) |
10x10cm tile or mosaic or below | 6x6mm [tooth] [form] for base | 3-4 |
60x60cm tile and stone or below | 8x8mm [tooth] [form] for base | 4.5-6 |
60x60cm tile and stone or above | 10x10mm [tooth] [form] for base | 6-8 |
60x60cm tile and stone or below, with deep
?groove | 8x8mm [tooth] [form] for base
3x3mm tooth form for tile back | 6-8 |
60x60cm tile and stone or above, with deep
?groove | 10x10mm [tooth] [form] for base
3x3mm tooth form for tile back | 8-12 |
- - - -

?
Technical parameters

- - - -
Original tensile adhesive strength(Mpa) | ≥0.5 |
Tensile adhesive strength after water(Mpa) | ≥0.5 |
Tensile adhesive strength after thermal aging(Mpa) | ≥0.5 |
Tensile adhesive strength after standing for 20 min(Mpa) | ≥0.5 |
- - - -

?
?
Storage period
?
Keep in a cool and dry place, unopened powder valid for one year.
?
Spec: 25kg/bag (40bags per pallet)? 20kg/bag(50bags per pallet)? 20pallets in 20 feet container
?
?
FOR OEM:
?
1. Brand Owner’s Authorization Letter is required to be issued & provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any consequences deriving from the use of the product.
3. OEM MOQ: at least 1*20 feet container per item/color.
4. Printery mold fee: USD250 for 3000 bags at least.
?? Package cost: USD0.40/bag
?? Printing lead time: 12-15days
?
?