Chemical Filling

?
Grout Adhesive Mosaic Tile Adhesive Eco Friendly For Bathroom
?
?
?The product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material, modifies epoxy glue with features of strong adhesive strength, low stress, low dilatability, no bubble, quick set, proper viscosity and easy operate, resistant of grind, aging, cold-hot exchange.
?
?
Features:
?
1,This product is a new type strong adhesive.
2, The adhesive has certain thixotropy, can finish the adhesion and gap filling at the same time, convenient and save time.
3, Good water resistance function and anti-aging.
4, Environmental friendly, non-toxic.
5, Good anti-infiltration function.
?
?
Application Scope:
?
Mainly used for paste all kinds of paper tiles, mosaic and brick.
?
?
Surface Preparation:
?
1. The substrate shall be dry, clean and free of oil stain and other loose substance.
2. The substrate shall have certain surface strength, common evenness and verticality.
?
?
Operation Process:
?
1, Mix the tile adhesive with the water by 3.3:1, to be dump-free, standing for 3~5minutes, restir if necessary and ready to use.
2, Use a notched trowel to apply the adhesive onto the working surface, with approximately 1m2 each time, then press the tile stone on the substrate, and adjust the evenness of the tiles; pasting from the bottom to the upper is appreciated.
?
?

- - - -
Coverage area(amount) | Technical reference |
use 6×6mm notched towel, approx. 2.8~3kg/㎡. | Adjust Time (min) | ≥5 |
Open Time (min)??? | ≥10 |
use 10×10mm notched towel, approx. 4~5kg/㎡ | Surface drying time | About 2h |
Appearance | White powder |
the above-mentioned dosages are recommended for the even substrate. | Shrinkage % | ≦0.50% |
Normal Shear Strength?????????????? | ≥ 1.0MPa |
Water Resistance Shear Strength ? | ≥0.7MPa |
Resistance Shear Strength | ≥0.7MPa |
Freezing and thawing | ≥0.7MP |
- - - -

?
?
Cautions:
?
1, Before application, please check the situation of the substrate.
2, Better be used at 5℃~40℃.
3, In summer, when the temperature of the substrate is too high (≥40℃), wet the substrate with water so as to prevent too earlier shortage of water from affecting the quality of application.
4, Do not add water in the cured adhesive and reuse it.
5, Clean the surface of the stone materials with a piece of wet cloth 1~2 hours after the application.
6, If application of the adhesive is conducted on the ground, no entry into such area is allowed until 24 hours after the application.
?
?
?
Store Method:
?
Store in cool and dry place, unopened product can be saved for one year.
?

?
?
Transportation:
This product is safety goods, can be transported by train, vehicle, ship and airplane.
?
?
Pinbang Grout advantages:
1. Quality guaranteed: All our order& acute;s quality is guaranteed during shelf life, if there is any quality problem, we will take measures for our customer& acute;s loss.
2. OEM: We do everything by ourselves, drum, design, filling, printing are all done by ourselves.
3. Free sample: All our goods& acute; quality is same with our sample.
4. Good after-service.