Gigabit Layer 3 Switch 24 Port with 10 / 100 / 1000Base-X GE Combo S5650-28SM - S5650-28SM
Gigabit Layer 3 Switch 24 Port with 10 / 100 / 1000Base-X GE Combo S5650-28SM For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Gigabit Layer 3 Switch 24 Port with 10 / 100 / 1000Base-X GE Combo S5650-28SM, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
Gigabit Layer 3 Switch 24 Port with 10 / 100 / 1000Base-X GE Combo S5650-28SM
?
?
? Backplane capacity 128Gbps
? Throughput 95.2Mpps
? 12*10/100/1000Base-X
? 12*GE Combo
? 2*10GE slot
? 1+1 redundant power
? Support stack
? Full-loaded power ≤50W
? 440mm*380mm*44mm
?
?
S5650 Series 10GE Security Routing Switch
S5650 Series are 10GE security routing Ethernet switch with high-performance, high-security and multi-service. Advanced non-blocking array exchange and huge packet cache support smooth operation at the extreme circumstance. It is for IP MAN convergence layer and large-scale enterprise zone or the core of the network layer.
?
?
?
Product Specification:
?
- - - -
? | ? |
Backplane capacity | 128Gbps |
Switching capacity | 128Gbps |
Throughput (IPv4/IPv6) | 95.2Mpps |
Memory and storage | 256MB DDR2 SDRAM Memory and 8MB Flash Memory |
Redundancy design | 1+1 hot-swap redundant power |
Power supply | AC:Input 90～260V,50～60Hz；
DC:Input -36V～-72V； |
Power consumption | Full-load ≤50W
Idle ≤15W |
Outline dimensions
(mm) (W*D*H) | 440mm×380mm×44mm |
Weight (in maximum configuration) | ≤6.5kg |
Environmental
requirements | Working temperature:-15°C～55°C
Storage temperature:-40°C～70°C
Relative humidity:10%～90%,no condensing |
- - - -
?
?
Business Features:
?
- - - -
# ? | TiNet S5650 Series |
L2 features | MAC | 16K MAC address
MAC Black Hole
Port MAC Limit |
VLAN | 4K VLAN entries
Port-based/MAC-based/IP subnet-based VLAN
Port-based QinQ and Selective QinQ (StackVLAN)
VLAN Swap and VLAN Remark
PVLAN to realize port isolation and saving public-vlan resources
GVRP |
Spanning tree protocol | IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP)
Remote loop detecting |
Port | Bi-directional bandwidth control
Static link aggregation and LACP(Link Aggregation Control Protocol)
Port mirroring and traffic mirroring |
Security features | User’s security | Anti-ARP-spoofing
Anti-ARP-flooding
IP Source Guard create IP+VLAN+MAC+Port binding
Port Isolation
MAC address binds to port and port MAC address filtration
IEEE 802.1x and AAA/Radius authentication |
Device security | Anti-DOS attack(such as ARP,Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack
SSHv2 Secure Shell
SNMP v3 encrypted management
Security IP login through Telnet
Hierarchical management and password protection of users |
Network security | User-based MAC and ARP traffic examination
Restrict ARP traffic of each user and force-out user with abnormal ARP traffic
Dynamic ARP table-based binding
IP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet
Port-based broadcast/multicast suppression and auto-shutdown risk port
URPF to prevent IP address counterfeit and attack
DHCP Option82 and PPPoE+ upload user’s physical location
Plaintext authentication of OSPF,RIPv2 and BGPv4 packets and MD5 cryptograph authentication |
IP routing | IPv4 | ARP Proxy
DHCP Relay
DHCP Server
Static route
RIPv1/v2
OSPFv2
BGPv4
ECMP
Strategy route
Route policy |
IPv6 | ICMPv6
ICMPv6 redirection
DHCPv6
ACLv6
OSPFv3
RIPng
BGP4+
Configured Tunnel
ISATAP
6to4 tunnel
IPv6 and IPv4 Tunnels |
Service features | ACL | Standard and extended ACL
Time Range ACL
Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame. System supports concurrent identification at most 50 service traffic
Packet filtration of L2～L7 even deep to 80 bytes of IP packet head |
QoS | Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
CAR(Committed Access Rate),Traffic Shaping and flow statistics
Packet mirror and redirection of interface and self-defined flow
Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR.
Congestion avoid mechanism,including Tail-Drop and WRED |
Multicast | IGMPv1/v2/v3
IGMPv1/v2/v3 Snooping
IGMP Filter
MVR and cross VLAN multicast copy
IGMP Fast leave
IGMP Proxy
PIM-SM/PIM-DM/PIM-SSM
PIM-SMv6,PIM-DMv6,PIM-SSMv6
MLDv2/MLDv2 Snooping |
Reliability | Loop protection | EAPS and GERP (recover-time <50ms)
Loopback-detection |
Link protection | FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
BFD |
Device protection | VRRP host backup
Double fault-tolerant backup of host program and configuration files
Board card hot swap
S5650-24S/48S support 1+1 power hot backup |
Maintenance | Network maintenance | Telnet-based statistics
RFC3176 sFlow
LLDP
802.3ah Ethernet OAM
RFC 3164 BSD syslog Protocol
Ping and Traceroute |
Device management | Command-line interface(CLI), Console, Telnet and WEB configuration
System configuration with SNMPv1/v2/v3
RMON (Remote Monitoring)1/2/3/9 groups of MIB
NTP(Network Time Protocol)
GN.LinkⅡ Server
NGBNView network management
WEB-based network management
Ping and Traceroute |
- - - -
?
?
GCOM Technologies Co., Ltd
Address: B-Building, SEI Optical Park, #2 Songpingshan Rd, North Hi-Tech Industry Park, Nanshan, Shenzhen, China, Shenzhen, Guangdong, China, 518000
Tel: 86-755-26981515
Shenzhen GCOM Technologies Co.,Ltd was jointly founded by the domestic experienced marketing, research and development, and management personnels in the field of communication and Futong Group.
Related Products
