Other Packaging & Paper

300mm wide and 10m length PP Fiber Woven Anti corrosion Tape for Metallic pipelines??
?
1. Polypropylene fiber woven tape system description:
?
The Polypropylene fiber woven tape is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .
?
The Polypropylene fiber woven tape shall be applied after the Liquid adhesive by hand or with a wrapping machine.

- - - -
Waterproofing- | Pipelines protection |
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt | _ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
-Bare pipe length
? |
- - - -

?
2. Polypropylene fiber woven tape structures
The specification of the tape consists of three layers,
Adhesive layer: Butyl rubber Bituminous Compound
Backing : PP woven fabric cloth
Interleaf: Antiadhesive Film Treated with Silicone
?
3. Polypropylene fiber woven tape features
?

- - - -
Waterproofing- | Pipes protection |
-Cold applied.
-High resistance??to bad weather environment
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers
-Safe,clean | _ Cold applied
_ Excellent self adhesion to pipe
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
_ Excellent resistance to cathodicdisbonding
_Wider service temperature range
? |
- - - -

?
Polypropylene fiber woven tape physical Properties
?
?

- - - -
Item | T 5100 | T 5130 | T 5150 | T 5165 |
Total thickness (mil) | 40mils | 50mils | 60mils | 65mils |
Tensile Strength (lb/in) | 30(5kg/cm) | 35(6.3kg/cm) | 39(7kg/cm) | 42(7.5kg/cm) |
Elongation (%) | 400 | 400 | 450 | 500 |
Length | 25mtrs | 20mtrs | 15mtrs | 10mtrs |
Width | 2“,4”,6”,9” |
Peeladhesion To primed pipe (oz/in) | 269(3kg/cm) | 296(3.3kg/cm) | 314 (3.5kg/cm) | 340(3.8kg/cm) |
To backing (oz/in) | 90(1kg/cm) | 90(1kg/cm) | 117(1.3kg/cm) | 135(1.5kg/cm) |
Dielectric Strength (KV/mm) | 42 | 42.6 | 43 | 43.8 |
Volume Resistivity (ohm·m) | 2.5 X 1012 | 2.5 X 1012 | 2.5 X 1012 | 2.5 X 1012 |
Water Vapor Transmission Rate (g/ m2/24h) | 0.06 | 0.05 | 0.03 | 0.02 |
Water Absorptivity (%) | 0.1 | 0.1 | 0.1 | 0.1 |
Application Temperature (°F) | -31-+160? (-35-+70℃) |
Max service temperature (°F) | -40-+250? (-40-+121℃) |
? | ? | ? | ? | ? | ? |
- - - -

?
Industries that We Serve
l???????? Oil, Gas and Water Transmission pipeline market
l???????? Oil and Gas distribution and utility markets
l???????? New pipeline construction markets
l???????? Rehabilitation and Reconditioning market
l???????? Offshore Industry
l???????? Refinery and Petrochemical Plant Industry
l???????? Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
l???????? Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
l???????? Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
l???????? Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
l???????? Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
l???????? Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.