Packaging & Paper

1.Specifications:1TypeHydraulic press brake with torsion bar2Working force200 T3Length of table3200 mm4distance between frames2650 mm5Throat depth400 mm6Open height480 mm7Stroke250mm8SpeedFast down 70mm/s
? ? ? ?Working speed: 8mm/s
? ? ? ?Return speed:80mm/s9Main motor18.5kw10ToolWith 1 punching and 1 bottom die11Main Electric Elements in cabinetSchneider12Seal in the cylindersNOK13Gross weight16000 kg14Overall sizes(mm) LxWxH3300x2500x296015Packing:With plastic covers
? ? ? ?Transportation: 1X20’OT2.Description:Y1,Y2 Axis------Two raster displays installed at both sides of ram to control cylinders. Main Performance : 1.The frame of machine is composed of tank, worktable, left and right housings and?ram. So it has high strength and good rigidity. Also it takes vibration to eliminate?stress.2.Through computer,the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point.The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user.3.Synchronization working principal of both machines:Adopting electric-hydraulic?proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to & quot;C& quot; plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision. When two machines working together,