Full - automatic Tracking System Metal Laser Cutter / Metal Cutting Equipment - GS-LFD4020

Full - automatic Tracking System Metal Laser Cutter / Metal Cutting Equipment For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Full - automatic Tracking System Metal Laser Cutter / Metal Cutting Equipment, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
Full - automatic Tracking System Metal Laser Cutter / Metal Cutting Equipment

Full-automatic Tracking System Metal Laser Cutting Technology Machine
?

?

Specifications :

?

- - - -
Model | GS-LFD4020 |
Laser?source?medium | Fiber |
Cutting?range(L*W)? | 4000 mm?×?2000 mm |
Z?axle?stroke | 120 mm |
Max?positioning?speed | 120 m/min |
X, Y?axle?Max?accelerate?speed | 1.2 G |
Cooling?form | water?cooling |
Laser?wavelength | 1070nm |
?
Output?power?of?laser?source
? | 1500W / 2000W 2500W / 3000W / 4000W (Optional) |
Min.?cutting?gap | ≤ 0.1 mm |
Positioning?accuracy?of?X,?Y?and?Z?axles | ± 0.03?mm |
Repeated?positioning??accuracy?of?X,?Y?and?Z?axles | ± 0.02 mm |
Processing?precision?of?work?piece | ± 0.1?mm |
Kerf?harshness | Ra?3.2 - 12.5?μm |
Min?setting?unit | 0.001 mm |
Control?System | Ahead?Tech (USA) |
Thickness?of?cutting?material?(according?to?material) | 0.2-25?mm |
Drive?model | Imported?servo?motor |
Power?requirement | 380?V,?50/60?Hz |
Total?installed?capacity | 20 - 25?KVA |
Working?temperature | 5?- 45℃ |
Continuous?working?time | 24?Hours |
Machine?weight | About?8150Kgs |
Outer?dimension | 8500mm?x?3800mm?x?2000mm |
Total?protection?level?of?power?supply | IP54 |
- - - -

?
?
Description
?

The?Z?axis?device?is?a?part?of?the?lifting?movement?of?the?cutting?head.?Cutting?head?of?the?lifting?movement?is?

controlled?by?the?CNC?servo?motor,motor?drive?ball?screw,driven?by?the?Z?axis?of?the?upper?and?lower?reciprocating?

motion?to?complete,?the?Z?axis?of?the?stroke?is?120mm,?both?ends?of?the?upper?and?lower?ends?are?used?to?control?

the?switch,?while?the?ball?screw?at?both?ends?with?an?elastic?cushion?to?ensure?the?safety?of?movement.?Ball?screw?

and?linear?guide?rail?are?used?in?high?quality?products,?to?ensure?the?accuracy?of?the?transmission.

Z?axis?can?be?used?as?a?numerical?control?axis?for?its?separate?interpolation?movement,?while?the?X,?Y?axis?linkage,?

and?can?be?controlled?by?cutting?the?electronic?part?of?the?head?to?meet?the?needs?of?different?situations.?Since?the?

Z?axis?is?controlled?by?the?numerical?control?system,?the?precision?of?the?servo?system?is?relatively?high?and?the?

stability?is?good.?Cutting?head?seal?with?elastic?buffer?to?ensure?the?life?of?cutting?head.

The?distance?from?the?nozzle?to?the?surface?of?the?plate?is?detected?by?the?capacitance?sensor?(installed?on?the?

cutting?head)?of?the?Z?axis?device,?and?the?signal?is?fed?back?to?the?control?system,?and?then?the?control?system?is?

controlled?by?the?Z?axis?motor?to?drive?the?cutting?head.?The?cutting?head?has?a?nut?to?adjust?the?focal?length,?and?

can?adjust?the?position?of?the?focus?according?to?the?material?and?thickness?of?cutting?material.?

Nozzle?is?one?of?the?vulnerable?parts?of?the?processing?process,?the?user?can?spare?some?of?the?different?aperture?

nozzle,?to?facilitate?the?replacement.

The?Z?axis?is?respectively?provided?with?a?linear?guide?rail?seat?and?wire?rod?base?grease?nozzle,?regular?grease.

?

?

Widely?used?for?metal-sheet?fabrication:?

Widely?used?for?metal?sheet?processing,advertising?trademark,?advertising?character,?high/low?voltage?electrical?

cabinet,?mechanism?parts,?kitchenware,?cars,?mechanical,?metal?craftwork,?saw?blade,?electronic?parts,?eye?glasses,?

spring,?circuit?board,?kettle,medical?microelectronics,?hardware,?knives?tool,?measurement,?instrument,etc.

Get Quote

Wuhan Hans Goldensky Laser System Co., Ltd.

Address: No. 72 Optics Valley Avenue, East lake High-Tech Development Zone, Wuhan, China, Wuhan, Hubei, China, 430000
Tel: 86-27-87925937
Wuhan Hans Goldensky laser system Co., Ltd. is subsidiary company of Han's Laser Technology Industry Group Co., Ltd. (stock code: 002008). We are high-tech enterprise specialized in R&D, manufacture and provide laser cutting, laser welding, laser cladding/quenching, and high-speed laser punching equipment and solutions. Most of the products of our company has fully independent intellectual property rights, widely used in sheet metal processing, steel metallurgy, petroleum, tobacco,automobile, machinery, aerospace, kitchen ware & home appliances and other manufacturing industries. In the future, the company will continue to be based on innovation of new and high echnology, using its own technology advantages to contribute to the industrialization development of laser processing complete equipment.

Related Products

Send A Message
*If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.