Coatings

Floating agent KC4050
Floating agent KC4050 is a kind of floating agent with the element acrylic acid ester, it can be applied to all kinds of PC system to produce the hammer pattern or wrinkle pattern.
1.Technical Parameters:
Appearance :white powder
Content: ≥98.5%
Volatile matter: ≤0.5%
2.Application and Performance:
★When producing, the floating agent KC1210 should be by final mix method, it can not pre-mix or extrude with other materials, otherwise, it wont obtain the pattern, the recommended dosage is about 0.1-0.8%, then cool mixed with powder enough and uniformity, but the exact dosage require to be confirmed after testing.
★ As usually, its not necessary to add leveling agent, gloss enhancing agent or benzoin commonly when using it, so as to save the powder coating production cost.
★ In order to adjust the pattern effect, it has to adjust the weight and type of filler in PC formulation, more filler dosage makes small & shallow pattern, fewer filler dosage bring big & dark pattern and easy to reveal the panel.
★ More dosage leads small texture pattern, by contraries, fewer dosage makes large texture pattern.
★ When using this products, mixed and extruded all materials except floating agent KC1210 of powder coating formulation, the extruded technology is consistent with the powder, then well-mixed with KC1210 after pulverizing, it had better filter the powder once or twice in vibrating screen.
3.Storage:
Store in a cool and dry place to avoid contacting other chemical products, keep away from heat and fire, sealed storage after each use.
4.Package:
The product is packed in polyethylene-lined composite kraft bag, the net weight is 25 kgs per bag.