Water Treatment

Technical Specification
Produc Name:Faucet Water Filter
Model:QJ-112
Filtration Fineness:0.2um
Outlet:2L/min(0.2Mpa)
Capacity:≥2000L(depending on water quality)
Filter Material:Ceramic+UDF+Tourmaline+Maifan stone+PP
Working Pressure:0.1~0.4Mpa
Operating Temperature:5℃~45℃
Should Source Water:Municipal Water

Functions :
1. filter particles,sediment,rust,algae,parasites,suspended contaminants;
2. filter chlorine, disinfection byproducts;
3. filter heavy metals, mineral reserves;
4. filter most of the bacteria;
5. Improve PH value of water, producing alkaline healthy water;

How to use:
1 Drinking Faucet water purifier has two outlets, one is direct drinking water outlet, the other is not
filtered tap water outlet, when the switching lever is in the horizontal position, the water flows through the filter and filter media.
(Note: The ceramic filter contain coconut shell activated carbon, When first using, the water will be grayish black, it’s caused by the inside activated carbon powder. This is normal situation and the water will be clean after two minutes.


Cleaning & Replacement Filter :
The ceramic filter is used 100% natural calcined diatomaceous earth, and is easy to clean and disassembly, to prevent secondary water pollution.
1. Ceramic filter won’t clogging after longtime using ,when you find the water flow is not strong enough, then could use the sandpaper scrubbing the ceramic filter, until it expose new surface.
2. Do not use any chemical detergents when cleaning filter , to avoid secondary pollution.
3.The filter can purify water more than 3000L, generally, could replaced the filter after 3-6 months according the using situation.