Electronic Data Systems

10 / 100M Single Modeethernet cable converter with SC Duplex Interface , fiber ethernet converter

?

Ⅰ. Product Description

?

The 3C-DU-100-13-20 is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The 3C-DU-100-13-20 supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with 3C-LINK′s 19′′ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. 3C-DU-100-13-20 will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers

?

Ⅱ. Product Features

?
# Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
# Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
# Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
# Extends fiber distance up to 20km
# Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
# Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
# Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
# Extend fiber distance up to 20km
# Easy-to-view LED indicators provide status to monitor network activity easily
# External power supply

?

- - - -
MEDIA CONVERTER & MODULE |
Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Basic Function | Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Extends fiber distance up to 20km
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely |
Ports | 1 100M SC/UPC port
1 100M RJ45 port (Auto MDI/MDIX) |
Wave Length | 1310nm |
Network Media 10BASE-T | UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m) |
Network Media 100BASE-T | UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m) |
Network Media 100BASE-FX | Single-mode Fiber |
LED Indicators | PWR, FDX/Col, Link/Act, SPD |
Dimensions (W*D*H) | 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) |
Power Supply | External power supply |
Max Power Consumption | 1.52W |
Safety & Emission | FCC, CE, RoHS |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing |
- - - -

?

III Application: