Electronic Signs

Energy Saving T8 LED Glass Tube brightness For Institution Buildings
?
?
Features:
1. Perfect?light?quality?design,?system?efficacy?>?100lm/W?,?can?replace?traditional?fluorescent?tube?light.
2. Very?even?light?output,?no-glare?design.
3. Universal power?input?range?of 85~265?VAC.
4. Very?nice?design,?high?quality glass??material?body.
5. Environmental?friendly.?RoHs?Compliant?
6. The?color?temperature?follows?ANSI?C78.337?Standard.
?
Application:
The?commercial?application?place?where?need?high?lux?level?but?soft?can?clear?light?quality,?
such?as?big?shopping?mall,?hospital,?office,?factory,?school,?airport,?etc.?
?
Specifications:?
- - - -
Item?No. | RE-G-T8-0.6M | RE-G-T8-0.9M | RE-G-T8-1.2M | RE-G-T8-1.5M |
LED?Tube | T8?tube | T8?tube | T8?tube | T8?tube |
LED?Chip | SMD2835 | SMD2835 | SMD2835 | SMD2835 |
Power | 9W | 12W | 18W | 22W |
Length | 600mm | 900mm | 1200mm | 1500mm |
Light?output | >900lm | >1200lm | >1800lm | >2200lm |
Body?Material | ?? Glass | Glass | Glass | Glass |
CRI | ≥80 | ≥80 | ≥80 | ≥80 |
Color?Temp. | 3000K/4000K
/5000K | 3000K/4000K
/5000K | 3000K/4000K
/5000K | 3000K/4000K
/5000K |
Power?Supply | AC?85-265V | AC?85-265V | AC?85-265V | AC?85-265V |
? Working
?Frequency | 50/60Hz | 50/60Hz | 50/60Hz | 50/60Hz |
Power?Factor | >0.95 | >0.95 | >0.95 | >0.95 |
Beam?Angle | >300° | >300° | >300° | >300° |
Working?Temp. | -10~50℃ | -10~50℃ | -10~50℃ | -10~50℃ |
Working?Lifetime | >25,000?hours | >25,000?hours | >25,000?hours | >25,000?hours |
Certificate | CE,RoHS,ETL | CE,RoHS,ETL | CE,RoHS,ETL | CE,RoHS,ETL? |
- - - -

?
#
Competitive Advantage:
? ? ? ?1 high power LED source with low attenuation,
? ? ? ?2 Low power consumption, highly efficiency, highly antistatic,
? ? ? ?3 saving energy and protection environment,
? ? ? ?4 long lifespan(>50.000hrs)
? ? ? ?5 No fluorescent flickering
? ? ? ?6 No RF interference, no buzzing noise.
? ? ? ?7?Easy in stallation
? ? ? ?8 No dangerous of glass broken
? ? ? ?9 Heat resistance up to 380℃
? ? ? 10 No coating falling off, color change, anti back flow;
? ? ? 11 Explosive-proof
? ? ? 12 Blue-ray resistance without human hazard and provide eye protection
? ? ? 13 CE/ETL & ROHS approval


Light Source Test Report

Dimmension(unit:mm)

nstallation instructions


Attention
Led tube could be installed directly to replace traditional tube for the traditional T8,T10 fixtures (Just take off the Starter is ok).
# Led tube must work with the correct voltage as the specification(rated voltage)
# Do not open the led tube by yourself.
# We recommend you remove the inductive ballast, for indoor use.
# Such led tube cannot replace emergency light
# We recommend that the suitable working temperature should be -20?C ~ + 40?C for our led tube, if exceed this range, will bring bad situation for product lifetime.
# The product installation & maintenance should be operated by professional workers
Remark:This product performance is being improved unceasingly, like has the change, not separate informs even slightly.
#
?