Industrial Supplies Stocks

?

Electric Power Fittings Ipc Insulation Piercing Connectorsp , Wet Proof?

?

Quick Detail:

?

1) Simple installation,small contact resistance and low temperature rise of the clamp.

2) The applicable voltage is 10KV,1KV or less than 1KV.

3) Piercing connector,simple installation,need not strip the cable coat.

4) Moment nut,piercing pressure is constant,keep good electric connection and make No damage to lead.

5)Self-seam frame,waterproof,and anti-corrosion,extend the using life of insulated lead and connector.

6) Adopted special connecting tablet,apply to joint of Cu(Al) and Cu(Al) or Cu and Al.

7) Small electric connection resistance,impulse current can be up to 15Ka.

8) Special insulated case body,resistance to illumination and environmental aging,the insulation strength can up to 6KV.

9) Aac surface design,apply to connection with the same(different)diamater,windconnection scope(0.75mm2--400mm2)

?

?

Description:

?

A broad usage in 1KV or 10KV overhead lines, branch connections without wire stripping.

· ? ? ? ?Branch connections for main cable, building distribution, streetlights systems

·??????? T-connection of insulation wire service

·??????? The connection of copper and aluminum

- - - -
?? Model | Application line(mm2) | Dimensions(mm) | Nominal current A | Bolt no. | application |
Main line | Branch line | A | B | H |
JJC10-240/240 | 95~240 | 95~240 | 90 | 85.5 | 113 | 476 | 2 | Application to 10KV overhead electricity distribution systems. |
JJC10-240/150 | 95~240 | 50~150 | 85.5 | 83 | 113 | 342 | 2 |
JJC10-185/50 | 95~185 | 16~50 | 78.5 | 80.5 | 113 | 162 | 2 |
JJC10-95/70 | 25~95 | 16~70 | 68 | 82.5 | 108 | 207 | 2 ? |
- - - -

?

- - - -
TYPE | Applicable conductor range mm2 | Bolts qty. |
Main line
2 section mm | Branch line
2 section mm |
JBC-1
JBC-2
JBC-3 | 35-70
35-150
50-240 | 6-35
35-150
50-150 | 1
1
2 |
- - - -

?

The insulation material of the connector made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. And the special contact blade guaranteed the best contact surface.

?

?

Applications:

?

The connection of main circuitries,the connection of main circuitry and outdoor circuitry,the connections of main circuitry and electric appliance and street lamps.

Applicable to T connection of structural distribution system,the connection of airy,?low voltage insulated cable,or indoor electric wire,distribution system of street lamp.

Can be installed with online line and can work without power.

?

?

Specifications:

?

Purpose of Insulation piercing connectors(IPC) is to connect main and one(PC13),two(PC24) tap conducor& acute;s of section,how is written on IPC body.Type without letter B serves to connect isolated conductors,with letter B bare conductors.IPC for one tap conductor is equipped with cable termination cap PCEC16/120, for two output wires-no cap.
?

IPC consists from two glass-fiber reinforced plastic parts,which are fited with two brass tinned teeth& acute;s,which are coated with UV-curing silica grease and the teeth are fitted with rubber insulation.This set is associated with the bolt,nut and pinch fixation segment.The terminals marked T are equipped with tear head. The lower part of the clamp is designed to be hold by the key 17 and the ventilation chamber,providing optimal ventilation of IPC.
?

Product can be also used as tap connector inside low boltage boxes.
?

PRODUCT RANGE:

?

PCT13C 95/50 RE/RM, isolared 6-95 / isolated 4-50 mm2 , Cu/Al.


USED MATERIALS:


UV&fire resistant PA66,PVC,dacromet or H.D.G(optional)finished steel,tinned copper.









?

?

Competitive Advantage:

?

Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.

Self-seam frame, wet proof and anti-corrosion, extend the using life of insulated lead and connector.