Industrial Supplies Agents

Eco Friendly Sanitary Flow Meter with Stainless Steel Flange
?
?

Advantage:



1). can?be?used?in?various?explosion-proof?places.


2). high?resistance,?fast?response?design?can?make?undistorted?collection?of?weak?signal?and?fast?
response?to?the?flow?changes


3).?It?has?the?function?of?low?conductivity?measurement.


4).? tests?full?or?empty?pipe by?adopting?capacitance?technology,?which?can?avoid?wrong?alarms.


5).?It?has?the?consistency?of?converter’s?interchange,?which?can?avoid?input?parameters?repeatedly.


6).?Wide?range?of?power?supply?mode?is?available

?

7).?It?adopts?the?international?leading?excitation?technology,?which?circuit?is?simple,?stable,?and?

reliable.

8).?It?provides?the?function?of?zero?correction?of?sensor?and?automatic?zero?adjustment.

?

?

Instrument detection and maintenance

?

?

Electromagnetic flow converter has self-diagnosis function. In addition to the

?

power and hardware circuit fault, The system also give alarm to other faults

?

in general usage. These information are given accordingly prompts in the

?

lower right of the screen.

?

?

1,Maintenance and repair

?

a) Sensor installation site should be consistent with the section four

requirements, Please keep the housing clean and tidy;

?

b)Transmitter should be placed in a clean, ventilated, dry place;

?

c)Need to inspect every two years, for high precision users, instrument

need to be submitted to censorship.

?

2,Transportation, storage

?

a)The instrument must be packed before transportation, be carefully

handled when loading and unloading.

?

b)Storage site must be dry, ventilated, avoid corrosive gas erosion, the

ambient temperature is not too low or too high;

?

c)Storage time better not exceed three years.

?

3,Unpacking and checking

?

a) The packing can’t be opened with heavy hammer, and should be

?

careful not to damage the instrument

?

b) Check the content carefully according to the packing list.

?

?

?

Data sheet

?

- - - -
MTF
Electromagnetic
flow?meter | | | | |
Divided type | Integrated?
type(IP67) | Explosion-
proof?
integrated | Battery
powered??
type | Heat(energy)?type |
Accuracy | ±0.2%??or?±0.5% |
Diameter | DN15~dn2400 | DN15~DN600 | DN25~DN1400 |
Flange | Comply?with?GB9119?Standard?carbon?steel(stainless?steel?is?optional) |
Pressure | DN15~DN1600?1.0,
1.6,2.5,4.0MPa?
DN700~DN2400?0.6,
1.0,1.6MPa | DN15~DN600?1.0,
1.6,2.5,4.0MPa | DN15~DN600?1.0,1.6,2.5,
4.0MPa?DN700~DN2400?0.6,
1.0,1.6MPa |
Please?consult?us?if?you?need?special?pressure |
Liner | PTFE,PU,CR,PFA,F46,IR |
Conductivity | ≥5μs/cm(Please?consult?us?if?it?is?less?than?≥5μs/cm) |
Electrode | 316L,Hastelloy,Ti,Ta,PT-It |
Protection?Level | IP67(For
sensor,?
IP28?is?
optional) | IP67 | IP67 | IP68 | IP67??IP68 |
Medium?Temperature | -25℃~180℃
(Please?
refer?to liner
?material) | -25℃~80℃(Please?
refer?
to?liner?material) | -25℃~180℃
(Please?refer?to
?liner?material) |
Influence?of?Ambient
?temperature | -25℃~60℃<±0.1%/10℃?or<±0.25%/10℃ |
Repetition | ≤±0.1%,±0.25% |
Analog?output?Error | ≤±0.02mA |
Current | ≤20m/s |
Electrical?connection | M20*1.5seal,G1/2,NPT1/2 |
Output?interface | Standard?output(4~20mA),Pulse?output,RS485,HART,Profibus-PA |
- - - -

?