Electronics Projects

Double Sided Circuit Board Impedance Controlled PCB Immersion Gold

?

PCB parameters

- - - -
PCB SIZE | 105 x 89mm=1PCS |
BOARD TYPE | 　 |
Number of Layers | Double sided PCB, 2 Layer PCB |
Surface Mount Components | YES |
Through Hole Components | YES |
LAYER STACKUP | copper ------- 18um(0.5oz)+plate TOP layer |
FR-4 1.5mm |
copper ------- 18um(0.5oz)+plate BOT Layer |
TECHNOLOGY | 　 |
Minimum Trace and Space: | 6mil/6mil |
Minmum / Maximum Holes: | 0.8/3.05mm |
Number of Different Holes: | 8 |
Number of Drill Holes: | 415 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | 0 |
Impedance Control | Single trace impedance control, Layer 1 7mil 50 ohm+/-10% |
BOARD MATERIAL | 　 |
Glass Epoxy: | FR-4, ITEQ IT-180 TG>170, er<5.4 |
Final foil external: | 1oz |
Final foil internal: | 0oz |
Final height of PCB: | 1.6mm ±0.16 |
PLATING AND COATING | 　 |
Surface Finish | Immersion Gold (16.5%) 2micoinch over 100 microinch nickle |
Solder Mask Apply To: | Top and Bottom, 12micron Minimum |
Solder Mask Color: | Gloss Green, Taiyo PSR-2000GT600D |
Solder Mask Type: | LPSM |
CONTOUR/CUTTING | Routing, Fiducial Marks |
MARKING | 　 |
Side of Component Legend | TOP |
Colour of Component Legend | White, IJR-4000 MW300, Taiyo Supplied. |
Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
VIA | Plated Through Hole(PTH), via tented |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | 　 |
Outline dimension: | 0.0059& quot; |
Board plating: | 0.0029& quot; |
Drill tolerance: | 0.002& quot; |
TEST | 100% Electrical Test prior shipment |
APPLICATION: | Output control |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
- - - -

?

?

Advantages

a) Excellent thermal reliability and CAF resistance providing long-term reliability for industrial and automobile application.

b) Good oxidation resistance and good heat dissipation.

c) ISO certified PCB manufacturing factory.

d) DDU Door to door shipment with competitive shipping cost.

?

?

More Applications in Electronics

Hdmi Switch
Voip
Remote Control
Oscilloscope
Access Point

Dc Transformers
Multi Output Power Supply
Phase Shifters
Globtek Power Supply
Access Control Methods

?

?

Design for Manufacture (5)

- - - -
Serial NO. | Procedure | Item | Manufacturing capability |
Large volume (S<100 m2) | Middle volume (S<10 m2) | Prototype(S<1m2) |

84 | Special tolerance | Board thickness of flying probe test | 0.6-4.0mm |
85 | Panel size of flying probe test | Size≤900X600mm,Small size can be compensated through manufacturing procedure |
86 | Panel size of fixture test method | Size≤460X380mm, Small size can be compensated through manufacturing procedure |
87 | Board thickness of fixture test method | 0.4-6.0mm |
88 | Tolerance of press-fit hole | ±2mil |
89 | Tolerance of NPTH | ±2mil |
90 | Tolerance of PCB thickness | 1.0mm≥PCB thickness, Tolerance ±0.1mm；1.0mm≤PCB thickness, Tolerance ±10% |
91 | Tolerance of depth of countersunk hole | ±0.2mm |
92 | Depth tolerance of blind slot | ±0.2mm |
93 | Maximum shipment size | Size≤1200X600mm(Double side, no test required) |
94 | Size≤1000X600mm( Multilayer, no test required) |
95 | Minimum shipment size | 10X10mm |
96 | PCB thickness of HASL | 0.8-3.0mm(Hole less 0.5mm should be use via-plug or mask-tent ) |
97 | HASL PCB Size | Size≤600X460mm |
98 | PCB thickness | 0.15-7.0mm |
99 | Depth of V groove | 0.8-3.2mm |
100 | Distance of non-continuous v-groove | ≥7mm |
101 | Max. drill diameter | Size≤6.5mm (Counterbore or router will be used for holes more than 6.5mm, Min.tolerance ±0.1mm ) |
102 | Max. countersink diameter | Size≤6.5mm Countersink can be used counterbore drill or router) |
103 | Distance of Bevel | Size≥11mm | Size≥5mm | Size≥5mm |
104 | Thickness of peelable mask | 0.2-1.5mm ±0.15mm |
- - - -



?

FAQ

Do you sell prototype PCB?
Yes. We offer PCB prototypes up to 32 layers, inclusive of FR-4 PCB, high frequency PCB, MCPCB and flexible PCB.

?