Others

Doors Acetoxy Silicone Sealant Organic One Components Adhesives

( OEM IS Available)
Scope Of Application:

Various interior decoration glass, aluminum alloy and glass device projects ; Various glazing projects
Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material

Instruction:

Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material .
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material.

Main Technology Data:

NO.
Item
Data
1
Type
Acetoxy
2
Density g/cm3
0.98
3
Capacity movement
±30%
4
Skinning time
5-15 minutes
5
Drying time(2mm/h)
8-10
6
Drying(4mm/h)
18-22
7
Max. Tensile strength
1.3
8
Hardness shore
21±2
9
Elongation at Break(%)
≥500
10
Modulus Mpa(100%)
0.60
11
Application temperature
-20 to +40
12
Temperature resistance
-50 to +100
13
adhesive
OK
14
Weatherproof
OK
15
Cold-hot adhesive
OK
16
Under water adhesive
OK
17
Elastic Recovery Ratio
96
18
Mass-loss Rate
35
Skin drying time and fully drying time under: 23 and 50% humidity

Standard: GB/T14683-2003

Restriction of Usage:

1, Unsuitable used on the material& acute;s surface that leaking grease, plasticizer or solvent.
2, It should be used in the ventilated places, because the silicone sealant need to absorb the moisture
in the air for drying.
3, Unsuitable used for frost or wet surface.
4, Unsuitable used for metal coated glass assembly
5, Unsuitable used for marble, granite and other alkaline substances joints sealing.