Construction & Decoration

The door opening machine is a kind of drive,Website:http://www.chinastainlessdoors.com, which is composed of a motor, a speed changing mechanism and a clutch device, and belongs to an electromechanical product. Usually used to achieve a variety of door body electric open, close.1, door closer opener operator, the door body at the top of the beam at the installation, installation is close to the ordinary door, suitable for frequent open, can be used with access control card. With the development of economy, people realize the door automation products gradually become the door machine, because it can be installed on the intelligent management and digital management, to the end of the past people to get off to open the door of the era, is a great social progress, improve the quality of life of people and improve the work efficiency, and safe and convenient.2, wheel type opener operator: the middle of the bottom of the door installation, paste the ground running. The maximum opening angle is fixed according to the position of the position controller of the position controller, and is suitable for the application of the opening frequency. Due to the low cost, applicable to the general courtyard door.Stop walking wheel opening machineStop walking wheel opening machine3, push type?opener operator: wall mounted, hydraulic and electromechanical type is divided into two kinds, the maximum opening angle of 105 degrees. Electromechanical type applies to open frequency application, a width of 5 meters within the door. The hydraulic type applies to open high frequency, single width 7 meters within the door. Is currently the most widely used to open the door.