Medicine & Health Products

Features

?
# The facial brush using the most advanced technology of induction charging, just only put the adapter absorbed too induction region to the tail of the host, then it is in charging, its very safe and convenient.
# The facial brush with a waterproof body fully it is conform to the IPx4 which is the highest degree of protection , so do not worry dipped into the water leakage or it doesn& acute;t work.
# The facial brush with thirteen different cleaning intensity and cleaning mode, can customize as you needed freely.

?

Skin video detection mode

The micro high-magnification lens for skin video analysis is equipped at the rear of the handle. The kind of tiny lens can make real-time communication with mobile phone APP by 2.4G WIFI technology. By amplifying the image of facial skin, the lens enables you to directly see the skin condition with your phone. Professional skin diagnosis can be implemented by skin photo, then detailed analysis can be made to establish your own skin care program.

?

1 starting up

2 Press the function button to switch to video detection mode

3 LoginMooskin App

4 Click the test button to Link

5 Use your cell phone to search for WIFI “Mooskin”, enter the initial password and then connect to the device.

6 Return to app and connect

7 Skin video detection, which can manually switch to landscape mode or vertical screen mode.

8 Screenshot and save
?
Specifications
?

- - - -
Parametersmodel | Bottom case | handle |
Input voltage (V) | 12 | 12 |
Charging current(MA) | 800 | 800 |
Internal battery voltage (V) | 7.4 | 7.4 |
Standby current(MA) | 2 | ? |
Operating current(MA) | <120 | 60～400 |
Shutdown current(UA) | ? | <50 |
- - - -

?

- - - -
Parametersmodel | Face-cleansing instrument |
Maximum power of the whole part(W) | ＜5 |
Input voltage of the power adapter(V) | 100～240 |
Output voltage of the power adapter (V) | 12 |
Output current of the power adapter(A) | 2 |
Vibration frequency(n/min) | 150 |
Magnification of lens(times) | 50 |
Gear | 1～13 |
Battery usage time(min) | 240 |
Quick charge time(h) | 1 |
Waterproofing grade | IPX4 |
Length x width x height (mm) | 223mmX67mmX137mm |
- - - -

?

?

Potential Failure problems and solutions

?

This chapter summarizes the most common potential problems you could encounter with the appliance.

?

- - - -
Parts | Problem | Possible cause | Solution |
handle | The brush head get stuck, and can’t install on the device. | The position is not right, lack of strength | Find the right direction and revolve the brush clockwise with some strength |
The big noise occurs during face cleansing | Brush is not soundly fixed | Check if the brush headfixed onto the right position |
The indicator light of the handle doesn’t work | Bad contact with metal probe | Adjust the handle |
The product does not work when the button is pressed | Low Battery | Put the handle onto the charge port. When the right light is on, the battery is charged. When the blue light is on, then the battery is fully charged. |
+ or – button doesn’t work | Softly pressing | Press the button with more strength |
? | ? | ? |
No device can be found during video detection | Doesn’t connect to WiFi | Connect to WiFi with your mobile phone |
no face cleansing instrument is found | Please boot up the face cleansing instrument |
The face cleansing instrument can’t enter into video detection mode | Please open video detection mode |
Can’t find WIFI signal after switching into video mode for 30s | Possibly unsuccessful launch in video detection system | Wait for 30s more |
the WIFI signal of your phone may be unstable | Reboot your phone or change another phone |
Can’t find WIFI signal after switching into video mode for 60s | Something wrong with video detection process | Swift from face cleansing mode to video mode again |
Black screen after connection | Input wrong password | Return to the detection page and delete the wrong information in the device management area; restart the one key connection, and input the right password |
Video images disappeared | Video detection mode is shut down | Press the function button for a short time to restart it |
Unclear video images | Maybe the lens is dirty | Clean the lens with a soft cloth |
? | ? | ? |
? | ? | ? |
The bottom case | Charging indicator light doesn’t work | The power adapter is not well connected to the power outlet | Adjust the plug of the power adapter |
Air-drying system can’t be shut down during working | Maybe the time you press the button is too short | Prolong the time you press to 1s |
Air-drying and disinfecting system of the bottom case doesn’t work normally | the handle is not in the right direction | Put the brush in the right direction |
air drying system is shut up | Restart it |
sunshine/ultraviolet influences the intelligent detection system | use the product indoors |
Low battery | Charge the battery |
Bad performance of air drying system | Blockage of air at the intake of the bottom case | don’t put the bottom case onto the soft blanket |
? | ? | ? |
If the solutions above still can’t solve your problem, please take the product to our service center. |
- - - -

?

?