Hardware & Tools

?

Customized Environmental Test Chambers Temperature Humidity Environmental Testing Equipment For Electronic / Food

?

?

Design Standard:

?

GB2423/T5170/10586/10592, IEC68,GJB150,JIS C60068, ASTM D4714, CNS3625/12565/12566

?

?

Uses:

?

Environmental Test Chambers can simulate different environment condition. It& acute;s appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.

?

?

Specification:

?

- - - -
Model | KJ-2091 |
Inner size W×H×D(mm) | 500*400*400 500*600*500 600*850*800 100*100*80 100*100*100 |
Outside size W×H×D(mm) | 92*138*108 102*146*116 102*162*126 113*172*148 158*195*148 158*193*168 |
Inner chamber volume(V) | 80L 150L 225L 408L 800L 1000L |
Temperature and humidity Controll range | -20℃～150℃ -40℃～150℃ -70℃～150℃ RH20%-98% |
Function | Temperature and humidty fluctuation | ±0.5℃；±2.5%RH |
Temperature and humidity deviation | ±0.5℃-±2℃；±3%RH(>75%RH); ±5%RH(≤75%RH) |
Controller resolution | ±0.3℃；±2.5%RH |
Controller brand | Korea TEMI880 |
Heating Time (RT-HT)℃/min | 100 | 150 |
40 | 50 |
Cooling Time (RT-LT)℃/min | -20 | -40 | -60 | -70 |
40 | 50 | 55 | 80 |
Power supply KW | 4.0 | 6.0 | 6.0 | 6.0 |
Material | Inner material | SUS 304# steel plate |
Outside material | SUS 304# steel plate(surface disposing) |
Thermal insulation material | Thermostability high density chlorine formic acid foam insulator material |
System wind pathround-robin mode | centrifugal fan-broadband enforce circulation |
Refrigeration way | Single stage compression refrigeration |
Refrigerator | whole sealing piston France Taikang brand Compressor |
Freezing fluid | R4O4A or USA Dupont environmental protection refrigerant(R23+R404) |
Condensation way | forced air cooling or water-cooling |
Heater | Nichrome heating wire heating |
Humidifier | Semi-enclosed steam humidification |
Water-provide way | full-automatic periodical feeding |
Standard configuration | 1 Observe window(double-deck cavity toughened glass),1 50mm test hole in the left,1 PL inner chamber lamp,2clapboards, 1 bag of wet and dry bulb,3 fuses, 1 power line. |
Safety device | Non- fuse-switch〔compressor overload, refrigerant high low voltage,over-humidity and temperature protection,Protection switch,fuse stoppage warning system |
Power | 1φ 220V AC±10% 50/60Hz 3φ 380V AC±10% 50/60Hz |
- - - -

?

?

RFQ:

?

Why choose us?

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

?

2.Excellent after sale service:

1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.

?

3.Good Packaging:

Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

?

?

Pictures:

?