ctm68 Cryoskin CryoSlimming Cryo Body Shape Cryolipolysis 4 Handles 360 cryolipolysis Fat Cell Body Slimming Criolipolisis Fat Freeze
4 Handles 360 cryolipolysis Fat Cell Body Slimming
Price: 2695USD
Theory
Cryolipolysis (Fat Freezing)
Through cooling technology, triglyceride in fats will be converted into solid in particular low temperature. Fat cells premature aging and death. Through the normal metabolic processes to decrease the fat layer and achieve the purpose of partially melting fat.
Theory
Cryolipolysis (Fat Freezing)
Through cooling technology, triglyceride in fats will be converted into solid in particular low temperature. Fat cells premature aging and death. Through the normal metabolic processes to decrease the fat layer and achieve the purpose of partially melting fat.
1 Mini Cryo Treatment Handle 8 Treatment Handle Sockets
2 Middle Cryo Treatment Handle 9 Water Inlet
3 Touch Screen 10 Water Outlet
4 Key 11 Overflow
5 Small Cryo Treatment 12 Power Line Socket
6 Switch 13 Power Switch
7 Decoration Light
Operation
(1) Preparation before Starting the Machine
Before using this machine, check the fat thickness with the fat callipers to ensure whether the customer can use the machine. People with thin fat layers must not use fat freezing machines, otherwise it will endanger human health;
Antifreeze membrane must be used when using this machine, otherwise frostbite may occur;
The vacuum power should be adjusted according to the customer's tolerance, starting from the lowest value;
For initial use, the freezing temperature range should be set between 0 ° C and -5 ° C;
Ensure the water tank is full of 9L water for cooling system;
the power line has been connected correctly;
the hand piece is well connected with the equipment.
Technical Parameters
Cryo Handle Number | 3 working handles |
Handle Sizes | 1 Mid handle: treat area --- for waist & thigh 1 Small handle: treat area --- for thigh, arms & crus 1 Mini Cryo handle (4cm*7.6cm) --- for arm & double chin |
Screen | 10.4 inch touch screen |
Cooling Temperature | -13*C/+43C (Warm up to 43°C in the first three minutes, and then start cooling, the lowest temperature can reach -13°C ) |
Vacuum Output Pressure | 0-100Kpa |
Cooling Liquid | Pure water, with 9L water tank |
Cooling System | Water cooling+Air cooling+Semiconductor |
Default Working Time | 0-60 minutes |
Machine Power | 1600W |
Package Size | 75cm*59cm*122cm |
Voltage | 220V/50Hz or 110V/50Hz or 110V/60Hz |