Industrial Supplies Stocks

CR / HR Steel Hydraulic Cutting Machine ZJX-0.5-1.5X1250 With Tension Device

?


?
Description


1. Hydraulic entry coil car???????????????????
? ◆The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
? ◆It is driven vertically by hydraulic cylinder with four guide pillars. ??
? ◆The level movement is driven by cycloid motor .
? ◆The capacity it can carry is 8 Tons(MAX).
?

?
?
2. Hydraulic cantilever un-coiler
? ◆Supporting steel rolls and uncoiling.
? ◆It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
? ◆7.5kw motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
? ◆The capacity it can carry is 8 Tons(MAX).
?

?
?
3. Slitting machine
? ◆Power part: This is composed of power-stand, decelerator, 15KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, side guide device, etc.
? ◆Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ120mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device.
? ◆It change the blades through moving out the bracket hydraulically and is very convenient and fast.
?

?
?
4. Scrap winder????????????????????????
? ◆It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and moment motor.
? ◆It is used to pack and wind the slitting scrap strips.
?
5. Tension device
? ◆It consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and hydraulic shaft lifting the press down device.
?

?
?
6. Hydraulic recoiler???????????
? ◆It consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting decelerator, 30KW frequency conversion control motor.
? ◆It uses the hydraulic movable arm with the supporting spacers to ensure the even recoiling quality.
?
?

?
7. Hydraulic exit coil car??
? ◆The car can carry the dividing coils and lift up and down and is movable.
?

?
8. Electric control system: electric cabinet and operate table.???????
?
9. Hydraulic system: the hydraulic stand, pipes and the connect part.
?
?


Applications


?
ZJX-0.5-1.5X1250mm simple hydraulic slitting line is used for slitting the CR/HRC/stainless steel /galvanized to prepare for the next process.
?

- - - -
Application: | CR/HRC/galvanized and so on |
thickness of coil plate: | 0.5-1.5mm |
width of coil plate: | 1250mm |
coil weight: | 8MT(max) |
coil I.D: ? | ф508 |
coil O.D: | ф1400mm |
the diameter of slitting blade shaft | ф120 |
slitting blade: | φ120Xφ220X10 |
material of slitting blade: | 9CrSi |
the hardness of slitting blade: | HRC58°-60° |
recoiler I.D: | φ508 |
power: | 380V/50Hz/3Ph |
tolerance of width error: | ≤±0.05mm/2M |
line speed | 0-40m/min |
area of the whole machine: | 25m(L)x6m(W) |
Production orientation | from left to right |
- - - -


?
Layout of the whole line

?
?
Below is the photos from our slitting line
?

?

?
?
Customer with manager

?
?
?
Competitive Advantage
?
# # convenient to operate
# accurate precision of shearing
# high ratio of performance to price
# tidy recoiling


?
?
Customer feedback
?

?
?
If you need the high speed and automatic slitting line, here our company is !
?
If you need simple, need special slitting line, we can also meet your requirements!
?