Active Components

?

CFL Full Spiral 20W 6400K Compact Fluorescent Lamps to Replace 120W Incandescent Bulb

?

?

Description

?

1?. Living up to the IEC60968 & 60969 standard .

2?. The average lifetime of our lamp is at least 6000h .

3?. Can start under the condition of - 30 ℃ and low voltage .

4?. No flicker , No noise , No electromagnetic interference ( EMI ) .

5?. Using nickleplated aluminum base , very good to avoid getting rusted .

6?. Voltage : Both 110 - 130V and 220 - 240V available with 50 / 60Hz ; Wide range voltage is possible .

7?. Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance .

8?. The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .

9?. Easy to apply , can change traditional incandescent bulbs directly , the ballast in integrated in to the lamp .

?

Lamp parameters

?

- - - -
Tube Parameter for CFL | Type | Full Spiral |
Tube Diameter | ?Φ 12mm |
Wideth | ?52mm |
Length | / |
Circle | ?4T |
Color Rendering Index | ?> 80 Ra |
SDCM | ?< 5 |
Color Temparature | 2700K - 6400K |
Luminous Efficency | ?> 62 lm / w |
2000h Luminous Depreciation | ?< 15% |
Responsive Time | ?< 0.5s |
Turn on off time | ?> 10 000 times |
Luminous Decay | Less than 15% at 2000hrs |
Powder | 100% A - gradeTriphosphor |
Electronic Parameter for CFL | Power | 20W |
Power Factor | ?> 0.5 |
Working Voltage | 110V - 127V / 185 - 265V |
Transister / Capacitor | Huajing / Aishi |
Base | Size | E27 |
Materials | Nickelplated Aluminum |
Type | Soldering |
Plastic cover | Wideth | 61mm |
Materials | PBT |
No middle cover |
Operating Temp. | ?-?30 ℃ to + 40 ℃ |
Life Time | ?> 8000H |
Time need to be stable | 3 Mins |
Lumen | ?> 1200 LM |
- - - -

?

Features

?

1?. Ventilation hole on the plastic cover

2?. P.F. : > 0.5

3?. Power consumption: < 10%

4?. Lead free glass tube

5?. 100% triphosphor A - grade powder

???? 1 ) Luminous efficency: > 60 lm / w

?????2 ) Brightness maintance: > 80% after 2000H

???? 3 ) CRI : > 80 Ra

???? 4 ) SDCM : < 5

6?. Compact type , integrate the ballast in the lamp

?

Competitive advantage

?

1?. Technical parameter adjustment :

???? 1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

??? ?2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

??? ?3 ) Turn on off test , to make sure the life time of the lamp

??? ?4 ) Start test in low temperature and low voltage ( light in the fridge )

2?. In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

?

?

Quality Control ( QC )

?

1 . Strict raw materials inspection .

2?. After laoding the container , we will trace the life time of ech order , we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

3?. In the warehouse , our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

4?. we are testing every lamp before packed in the cartons .

5?. In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

?

?

Application

?

Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .

?