Utensils & Vessels

Description of our production

?

Our chemical composition:

- - - -
? Alloy | Si | Fe | Cu | Mn | Mg | Zn | Cr | Ti | code |
8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.1 | 0.05 | 0.08 | 1 |
1235 | Si+Fe:0.65 | 0.05 | 0.05 | 0.05 | － | － | 0.06 | 2 |
8079 | 0.05-0.3 | 0.7-1.3 | 0.05 | － | － | 0.1 | ? | － | 3 |
- - - -

?

?

Our mechanical property:

?

- - - -
Foil Classification | Thickness(mm) |
Alloy | Thickness Tolerrance | Width Tolerance |

Thin Gauge
0.005-0.009 | 0.005 | 1235 8011 8079 | ±5% | (200-1880)±1 |
0.006 |
0.0065 |
0.007 |
0.008 |
0.009 |

Mechanical Performance | Strengthen(Mpa) | 50-160
(according to customer& acute;s requirements and technical agreement) |

Elongation(%) | 0.5%-8%
(according to customer& acute;s requirements and technical agreement) |

Typical core I.D. | Φ76.2 Φ152 |

Typical Coil O.D. | Φ300 Φ500 Φ1000 (selectable) |

Trace Elements | pb≤0.01 cd≤0.01 As≤0.01 |

Wettability | ≥Class B |

Pin no. (P/m2) | according to custiomer& acute;s requirements and technical agreement |

Light (L) | according to custiomer& acute;s requirements and technical agreement |

Coil Connector | according to custiomer& acute;s requirements and technical agreement |

Surface Quality | 1 even serface flatness 2 clean surface without corrosion,spots,wrinkles,scratches,light and dark lines,marks slots etc. 3 no light spots,marke,wheel mark and black line. 4 no yellow spots from the lubricatio oil burning and breaks on the surface of the final production. |


Quality Outside | No defects such as burring, cracks, telescoping, loosen coils, core out, arrow etc.. Welding firmly, foil section neat and clean. |

- - - -

?