Air-compressing & Air-separation

UltraPulse CO2 fractional laser series

Treatment Theory

Fractional laser light penetrates the skin with tiny thermal channels through the random scanning. This creates an ablative and thermal effect on only these channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.

?Application

ApplicationRangeof Fractional treatment handpiece:

Large pores, Fine lines, Skin tightening and whitening, Skin loosen (Deep Wrinkles) , Stretch marks;

Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid

Pigmented skin lesions: Chloasma, Freckles, Age spots, Sun spots, CAMLS

Reconstruction of photoaging skin.

ApplicationRangeof Incision Handpiece:

Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery.

In Cosmetic Surgery, it can be adapted to incisions for Blepharoplasty, Skin Tags and Ingrown Nails, Compound Nevus and Intra Dermal Nevus etc.

YILIYA-10600 ?

1. Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes

2. Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)

3. Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients.

4. Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during treatment, satisfy different therapists unique request.

5. 12.1” TFT touch LCD, rotated 360°gives you a luxury enjoyment.

6. Reserved entry access for laser room ensures a safe treatment.

7. Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total cost of ownership.

SPECIFICATION:

?

?

- - - -
? Laser Type | CO2 |
? ?Wavelength | 10600nm |
? Beam Delivery | 7-joint arm. |
? Maximum Output Power | 30W/20W/10W |
? Optical Beam Quality | TEM00 |
? Spot Size | 0.12mm - 1.25mm (Adjustable) |
? Spot Pattern | Circle / Triangle/ Square/ Rectangle / Rhombus /Line |
? Scan Area Spot Volume ?(Square) | 16 spots4×436 spots6×664 spots8×8 100 spots10×10144 spots12×12 |
? Spot Density | ×1 / ×2 / ×3 / ×4 / ×5 / ×6 |
? Aiming Beam | 635 nm |
? Power of the Aiming Beam | ≤5mW |
? Laser Operating Mode | UltraPluse |
? Scanning Mode | Randomized Scanning |
? Pulse Energy | ?10mj~200mj (every stepping: 2mj) |
? Pulse Interval | 1ms~100ms (every stepping: 1mj) |
? Working Mode | Continuous operation with intermittent loading |
? Cooling | Air Cooling |
? Power Supply | AC 220V 50Hz/ AC 110V 60Hz |
? Dimensions (before packaged) | 650mm*340mm*760mm |
? Dimensions (After Packaged) | 760mm*455mm*975mm |
? Net Weight | ?45KGS |
? Gross Weight | ?88KGS |
- - - -