Hardware & Tools

Feature of Ceramic Inserts:

1, good wear resistance, traditional machining tool is difficult to be processed or no processing of high hardness materials. Thus, it is possible to dispense with the power consumed by annealing processing; and it can also improve the workpiece hardness, machinery and equipment to extend the service life;
2, not only for high hardness materials for rough, finishing, but also for milling, planing, interrupted cutting and rough rough car, such as the impact of a lot of rough machining;
3, when the ceramic blade cutting and the metal friction is small, the cutting is not easy to bond on the blade. Not easy to produce the built-up edge. Plus can carry on the high speed cutting. Therefore, when the condition is same, the work piece surface roughness is relatively low.
4, the tool life is several times higher than the traditional cutting tool, which reduces the number of tool changing times, and ensures the small taper and high precision of the workpiece;
5, high temperature resistant, good red hardness. In 1 200 DEG C under continuous cutting. So ceramic tool cutting speed can be much higher than that of hard alloy. For high speed cutting or achieve & quot;in the car, milling instead of grinding, cutting efficiency is 3-10 times higher than that of the conventional tools to save man hour, electricity, machine bed number of 30-70% or higher effect;