Chemical Powders

New Type Flocculant Water Decoloring Agent for Textile Mills ETP

?

Description:
# # BWD-01 water decoloring agent was published in 90& acute;s, and had been developed by BLUWAT with 10 years, the quality is very stable,?it is a new type of high performance decolorizing flocculant, high perfromance in?de-coloring, flocculating, CODcr decreasing and other applications,?used to remove color of waste water generated by textiles process houses and dyes industries and other fields.
# BWD-01?is our bran,?Bluwat is?the biggest manufacturer and export of Water Decoloring Agent in the world. It is a special chemical?for?textile effluent?color removal treatment, especial the wastewater?containing the water soluble and insoluble dyes (reactive dyes, acid dyes, disperse dyes etc.), less dosage, the color clear, fast speed, high processing liquid clarification of the settlement, also improve the COD removal rate.
# It has high color removal of dye wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.
# The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water scarce areas, it comes as a heaven-sent facilitating recycling of the industrial effluent into process water. BWD-01 Water Decoloring Agent is used to solve this problem.
# In paper making, BWD-01 Water Decoloring Agent also can be used as fixing agent in the paper processing, will be very good performance.


?

?

Specifications:

- - - -
Appearance: | Colorless and?Translucid Liquid |
Solid Content:????? | 50%min |
?Viscosity(25°C, cps): | 50-300 |
PH Value (30% Water Solution): | 3-6 |
Specific Gravity (at 20°C): | 1.1-1.3? |
Water Solubility: | Completely Soluble With Water at Any Rate |
Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
Storage Temperature: | Room temperature? |
- - - -
?
?

Application Fields:
# # Very high performance in?treating?waste water with?Reactive dye, Acid dye, Disperse dye, Direct dye, Sulphur dye, Vat dye etc..(water soluble and insoluble dyestuffs).
# Published in 90& acute;s, and developed more than 10 years by Bluwat Chemicals.
# The quality is very stable, will not change to be?a layered?when temperature change.
# High efficient of color removal treatment for textile dyeing & printing mills, dyestuffs & pigment mills, ink & paper making mills wastewater.
# In paper mills, it is used as?retention agent?used in the paper and pulp processing, as Kemira K97.


?

?

Competitive Advantage:

- - - -
1 | High performance treating high-colority?effluent from textile dyeing mills, pigment mills, printing ink and paper mils. |
2 | As flocculant to de-color high-colority effluent from dyestuffs processing plants. |
3 | Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
4 | Can ben used?as retention agent in the paper & pulp processing |
5 | Faster sedimentation, better flocculation. |
6 | Non-pollution (no aluminum, chlorine, heavy metal ions etc.). |
7 | It can be used before or after biological treatment. |
8 | Less sludge produced than other inorganic coagulants. |
- - - -

?

?

Application Methods:

- - - -
1 | Before use, to make?BWD-01 with fresh water 40-50times, to have 2-2.5% concentration solution. |
2 | Make PAC solution with?2-5% Al2O3 content. |
3 | Make solution of Anionic flocculant with?0.1% concentration. |
4 | It is very important, to adjust the effluent pH value to 8-10,?higher or lower pH, BWD-01 works not well. |
5 | Add PAC solution, mix with effluent completely. about 1-3 minutes |
6 | Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
7 | Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is suggestion) |
8 | Sedimentation |
9 | Check color for treated effluent |
10 | Adjust dosage of BWD-01 and PAC to do more test to have better testing result. |
- - - -

?

?

Package and Storage:
# # Packed in?30kgs, 50kgs, 250kgs net plastic drums and 1250kgs net IBC drums, or others according to the requirements of clients.
# Suggested to store in room temperature, would show slightly stratification or appear white at low temperature, cannot be placed in the sun.


?

?

Bluwat BWD Plant?Snapshot: