Veterinary Medicine

CE FDA Special Care Orthopedic Polyester Fiberglass Casting Splint For Medical

?

?

Description

?

Orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially nonwoven fabric . Tt is characterize by better viscosity , fast drying time , high rigidness and light weight . Dure to better biocompatibility , polyurethane is widely used in medical fields . Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no teratogenecity , no local irritation and no anaphylactic reaction .

?

Features

?

1. ?Polyester net cloth fiber material are available .

2. ?Extra Strong : at least 20 times stronger than traditional plaster bandages .

3. ?Good ventilation : 200 times rate of breath than traditional plaster bandages .?

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Skin can be breathed freely and keep bacterial from reproducing .

4. ?100% permeable to X-ray , allowing subsequent X-ray photography without unwrapping and thus ? ? ? ? ? ? ?saving expenses for patients .

5. ?Easy to use : short immersion time , easy to shape , fast setting time .

7. ?Term of validity : 3 years . ?

?

Advantage

?

1) ?Simple operation : Room temperature operation , short time , good molding feature

2) ?High hardness & light weight 20 times hard than plaster splint ; light material and use less than ? ? ? ? plaster splint ;

? ? ?Its weight is plasters 1 / 5 and its width is plasters 1 / 3 , which could reduce wound burden

3) ?lacunary ( many holes structure ) for excellent ventilation

? ? ?Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus .

4) ?Rapid ossification ( concretion )

? ? ? It ossifies in 3 - 5 minutes after open the package and could bear weight after 20 minutes , But plaster ? ? ? splint need 24 hours for full concretion

5) ?Excellent X-ray penetration

? ? ? Good x-ray penetration ability makes X-ray photo clearly without remove the bandage , ?but plaster ? ? ? ? ?bandage need remove to make x-ray inspection .

6) ?Good waterproofing quality

? ? ?The moisture - absorbed percent is 85 % less than plaster splint , Even the patient touch the water ? ? ? ? ? ?situation , it still could keep dry in the injury position

7) ?Convenient operation & mold easily .

8) ?Comfortable & safe to patient / doctor

? ? Material is friendly to operator and it wont become tension after concretion.

9) ?Wide application

10) ?Environment friendly

? ? ? ?Material are environmental friendly , which could not produce polluted gas after inflammation .

?

?

- - - -
Specification (cm) | Carton Size ( cm) | Packing |
7.5cm x 30cm | 64x49x44 | 20 units/box * 6 boxes/carton |
7.5cm x 90cm | 64x49x44 | 10 units/box * 6 boxes/carton |
10.0cm x 40cm | 64x49x44 | 20 units/box * 6 boxes/carton |
10.0cm x 75cm | 64x49x44 | 10 units/box * 6 boxes/carton |
12.5cm x 75cm | 55x49x44 | 10 units/box * 4 boxes/carton |
12.5cm x 115cm | 55x49x44 | 5 units/box * 4 boxes/carton |
- - - -

?

?

Usage

?

1) ?Select proper specification according to the surgery position .

2) ?Put the pad ( cotton coil or cotton slipcover ) on the surgery position .

3) ?Immerse the roll in room temperature water ( 21°C?- 24°C ) for 4-6 seconds and squeeze it 2 - 3 times firmly . If the water warmer than 21 °C?- 24°C shortens the immersing time , while cooler than 21°C?- 24°C water lengthens the time .

4) Take the splint out and press out excrescent water ; Absorb water drip of the splint surface with towel .

5) ?Put the splint on the fixed position, molding it according to need . Mold it in 3-5 minutes after immersing in water because after that time it will concretion . Allow about 10 minutes for sufficient concretion and let patients not move during this time . It could bear electric weight after 20 minutes .

6) Fix the splint with gauze bandage or elastic bandage after concretion .

?

??


??
?



?



?

?

Sample Policy :


1. Sample according to your design drawing . Sampling time :3 - 5 days .
2. Design your own sample , then remake it .
3. Existing Samples Sampling time ?: 1day
4. Make mass production after your confirm the sample .


Quality Control :


1. We will not start to make the products until you confirm the sample .
2. The packing will be water-proof , damp-proof and sealed?


Our Advantage :?


1.?CE, ISO13485 certification ?.
2. One-stop service : excellent disposable medical products ,personal protection equipments ?.
3. Welcome any OEM requirements.
4. Qualified products ,100% new brand material ,safe and sanitary .
5. Offered free samples ?.
6. Professional shipping service if necessary .
7. Full series after sales service system .
?
Shipping :
?
We choose the shipping way according to your needs . Generally , two options :?
1. Sea shipping is cheap but slow
2. Air shipping is expensive but fast
?
Payment :
?
T/T , ?L/C or WEST UNION can be accepted
If the order value is less than 2000USD , full payment will be done . Thank you .
?

?Our products are disposed by the following main Areas of medical disposable?, medical consumables and medical tests . They are :

?

1 ?- Medical Cotton and Gauze products
2 ?- Medical Bandage and orthopedic casting products
3 ?- Emergency mylar foil blanket products
4 ?- Syringes & Needles
5 ?- Sterilization products


Sincerely hope to build a long-term business relationship with you . Any question pls feel free to contact .