Black Anti Corrosion Pipe Wrap Tape Corrosion Resistant Coating Material for Industrial - T100 ,T 200 series

Black Anti Corrosion Pipe Wrap Tape Corrosion Resistant Coating Material for Industrial For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Black Anti Corrosion Pipe Wrap Tape Corrosion Resistant Coating Material for Industrial, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
Black Anti Corrosion Pipe Wrap Tape Corrosion Resistant Coating Material for Industrial

0.5mm Thickness underground pipe wrap tape with competitive offer
?
Pipe wrap tape-----Description:
?
This coating system can be used for the purposes of steel pipe surface corrosion resistance for various pipelines in facility projects of petroleum, petrochemical industry, city gas, oil and gas storage and transportation, power, water supply, metallurgy, civil aviation, etc.
?
1.1 Inner wrapping adhesive tape:
(Anti corrosion tape, Anti corrosion tape, Anticorrosive tape) is for anti corrosion of underground, underwater, & overhead pipelines.
?
Pipe wrap tape-----Features:
1) The specification of the tape consists of two layers, adhesive and film
2) Inner layer: butyl rubber
3) Outer layer: polyethylene
4) Thickness: 0.38 - 1.27mm
5) Width: 50mm, 75mm, 100mm, 150mm, 230mm, 300mm,500 mm,800mm,900mm
6) Length: 30 - 300m
1.2 Outer wrapping adhesive tape:
(Protection Tape, Protective Tape,Mechanical tape ) is for protection of pipe and the surface of Inner Tape from damages.
?
Features:
1) The specification of the tape consists of two layers, adhesive and film
2) Inner layer: butyl rubber
3) Outer layer: polyethylene
4) Thickness: 0.40 - 1.30mm
5) Width: 50mm, 75mm, 100mm, 150mm, 230mm, 300mm,500 mm,800mm,900mm
6) Length: 30 - 300m
1.3. Anti corrosion Tape Primer Coat
(Synthetic Primer) complementary product covers of the rusting steel pipe and enable to enhance the adhesive to the pipe since it is working with the adhesive of the polyethylene tape.
P19: Solid content 19%;
P27: Solid content 27%.

?
4.Application of?0.5mm thickness underground pipe wrap tape
?
1.Steel?pipe?pretreatment
1.1?Keeping?the?pipe?external?surface?clean?and?dry.?Remove?the?dust,?
oil,?welding?slag,?burrs,?grease?and?dirt?on?pipe?surface.
1.2?Pipe?surface?prepared?up-to?a?level?of?Sa?2?or?2???or?St?2/st?by?sand?blasting.?
1.3?After?the?pre-cleaning?operations,the?pipe?surface?not?smooth
which?may?sharp?the?pipe?coating?should?be?burnished?,?the?abrasive?
dust?attached?on?the?pipe?surface?should?also?be?cleaned?clearly.
1.4?If?flash?rusting?occurs,?the?surfaces?must?be?re-cleaned?by?blasting?as?above.?
2.Coating?&Wrapping?application
2.1?Coating?&wrapping?application?consist?of?primer?application,?inner?
tape?coating?,outer?tape?coating?.
2.2?weather?condition
2.2.1?When?the?wind&sand?was?strongly,?when?the?sand?and?dust?covered?
on?the?surface?of?pipe,?primer?,tape?etc.,?should?not?be?brushing?primer?
and?wrapping?the?tape?if?there?is?no?reliable?preventive?measures.
2.2.2?When?air?humidity?is?greater?than?80%,or?when?the?pipe?surface?is?wet?from?any?precipitation,?should

?not?be?brushing?primer?and?wrapping?tape.
3.Brushing?primer
3.1?The?brushing?time?should?be?control?within?6?hours?between?the?pipe?surface?treatment?and?brush?

primer.During?brush?primer?,pipe?surface?should?be?free?from?damp?and?pollution.If?the?pipe?surface?rust?

return,should?be?re-pre-cleaned.
3.2?The?primer?should?be?mixed?evenly?in?the?container?before?brushing.
3.3?The?primer?should?be?applied?uniformly,?without?any?sags,floods,runs,drips,bare?spot?and?over?spray,?

such?as?leakage?brush,?clot?,?streaming.?The?primer?coat?DFT?shall?not?be?less?than?25-50micron(1-2mils)
3.4?After?the?primer?dried,?then?wrapping?the?tape(It?usually?takes?3to?5?minutes.).
3.5?Consumption:
machine?application approx.?0,1?litre/m2
hand?application approx.?0,2?litre/m2
?
4.Wrap?tape?application
4.1?Wrap?tape?application?consists?of?hand?application?and?machine?application.
4.2?The?tape?applied?temperature?must?be?above?5?degrees,the?coating?construction?temperature?shall?be?

more?than?-5?degrees?as?better?.
4.3?The?tape?shall?be?spirally?applied?,minimum?overlap?shall?not?be?less?than?50%.
4.4?When?a?new?roll?of?tape?started?,the?ends?shall?be?located?to?ensure?the?continuity?of?wrap?tape?using

?the?same?method?of?application.
4.5?Outer?tape?applied?method?is?the?same?as?above.
5.Cutbacks
Cutbacks?shall?be?a?minimum?6inches(150mm)?from?the?ends?of?each?
pipe.The?cutbacks?may?be?tapered?or?straight?edge?for?the?total?thickness
of?the?coating.

?

?
Know more details please feel free to contact us.

Get Quote

Jining 聽Xunda聽 Pipe聽 Coating聽 Materials聽Company

Address: Ershilipu Industrial Park,Jining City, Jining, Shandong, China, 272100
Tel: 86-138-63735038
Jining Xunda Pipe Coating Materials CO.,Ltd specializes in making anticorrosion coating material for petro-chemical, Oil,Gas and Water underground, underwater and overhead pipelines transport system, are widely used for electricity, chemicals, construction. Xunda company main products has: Polyethylene inner wrap adhesive tape,Polyethylene outer wrap adhesive tape, Polyethylene Joint wrap adhesive tape,Polyethylene 3 layer wrap adhesive tape,Polyethylene Bitumen adhesive Tape, Polypropylene Fiber Woven Tape,Polypropylene waterproof membrane tape, Aluminum Foil Anticorrosion Tape, Alu Flashing tape,PVC anticorrosion pipe wrapping tape,Hot applied wrap tape etc. Our major market including 80 countries, widely distributed in South Asia,Southeast Asia, the Middle East, Africa, Central Asia, West Asia, North Europe, Eastern Europe, South America, Australia.

Related Products

Send A Message
*If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.