Wire Mesh

Meg nets, also known as burglar mesh, in the shandong area was known as the net cost, production technology for double stigma commonly welding machine (manual arc welding has been eliminated).Each grid for side aperture 6.5 cm generally - 14 cm.Use wire roughness generally from 3.5 mm to 6 mm.Wire material is Q235 low carbon wire commonly.After crimped wire flower welded together Meg black wire.The shape of the mesh size general specifications for the 1.5 meters X4 meters, 2 meters X4 meters, 2 meters X3 meters.
General surface treatment for the cold (electric) galvanized processing.There is also a hot dip galvanized, plastic, plastic spraying.But, overall, ninety-nine percent of cold (electric) galvanized processing.Meg nets have the following several points need to pay attention to
1. Wire diameter
Meg is required of the smaller mesh, silk by the thinner, the bigger the mesh and wire required by the more thick.Such as 6.5 cm mesh aperture to iron diameter of 3.5 mm to 4 mm.Fine a weld is broken again, again thick and heavy, workers can& acute;t afford to.
2. The overall size
Meg nets oad width is generally not more than 2 meters.Length is generally not more than 4 m.More than 2 meters one is a worker, the other is the zinc plating is not good.Also can reach 6 meters in length, but no more than 6 meters.Generally more than four meters after the price will be increased significantly.
3. Whether the solder joints welded firmly.
Meg spot welding, is generally quite strong, but if the worker is a novice, adjust machine technology is not high, can appear open solder joints.Once appear this kind of situation, will bring great losses to the customer and works.
4. Galvanized process
Galvanized is Meg vulnerable link, many workers are irresponsible, the boss is a bit not careful, workers are probably will shorten the time of galvanized, soon enough on zinc is caused.The results also can make factories and dealers by heavy losses.
Materials: high quality low carbon steel wir