Electrical & Hardware

Aluminum alloy Automotive GPS Tracker 70mA DC Customized Waterproof

?

?

Water-proof casing design is a patent can prevent GPS device was damaged by into water, use aviation socket for IO interface, easy to connect with cables; CAN/485 BUS interface, easy to control vehicle; 1 route AD input interface can detect fuel consumption and temperature; especially suitable for engineering truck, special vehicle that run in severe environment.

?

?

Main features:

?

● Based international newest chip, double core structure, build-in RTKe OS, powerful.

● GPRS and SMS double channels, TCP and UDP double working mode

● Positioning based GPS reflected wave, assist with base station, strong capacity to prevent blocking to reduce the blind area

● Three proofing design, Quadruple protection for power source, 4 levels watchdog

●?? Anti-dismantle design for SIM card

● Low power consumption

● Build-in high capacity backup battery

●? CAN/485 BUS interface.

● It can update remotely, easy to maintain

● Approved by 3C, and approved by national grade quality authentication.

?

?

Product functions:

?

? ?1.Signal detecting and control:

6 routes signal sensor, 7 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit; user-defined backup output control.

2.Alarm:

8 alarms, 3 modes of alarm.

3.Monitoring:

vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning.

4.BUS communication:

via CAN/485 BUS to achieve two ways communication between PLC controller and service center, real time monitor vehicle status and control vehicle.

5.Fuel consumption detecting:

build-in AD input interface, equipped floater attenuation cable can measure fuel consumption.

6.Remote update:

main device’s program was support to remote download; user can renew the program remotely.

7.Protection:

Power saving mode: in this mode, GPS device’s working current will drop to30mA@12V when vehicle was in flameout.

Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (10V).

Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (60V), backup battery can work for 3h.

?

?

Performance parameters:

?

- - - -
Performance parameter:
- - - -

- - - -
Hardware features | ? |
Hardware framework | Adopt double core chip, RTKe embedded OS |
Communication module | GPRS, SMS double channels module |
Reliability design | Quadruple protection for power source, 4 levels watchdog |
PCB protection | Three proofing protection |
Water-proof design | Water-proof design for casing, water-proof grade IP67 |
Technical specifications | ? |
Working voltage | 10～60 V/DC |
Limiting voltage | 100V/DC |
Car battery protecting voltage | Low: 10V(12V car battery)or 20V(24V car battery)high:60V |
Power voltage of Anti-reversed connection | ≥100V |
Average working current | 70mA DC 12V |
Power saving mode | ＜30mA DC 12V |
Backup battery | Working time 3h |
Dimension | 85x 134x 35mm(L x W x H) |
Canning material | Aluminum alloy |
Main device weight | 0.35kgnet weight |
Interface | ? |
GPS antenna | BNC interface: －26dB ?cable length: 4m |
GSM antenna | SMA interface: －3dB ?cable length: 3m |
Vehicle detecting interface | 2 routes(1 route high level, 1 route low level) |
AD detecting interface | 1 route AD signal input(for fuel consumption detecting GPS device) |
Communication interface | 1 route CAN BUS 1 route 485 port |
Data interface | 1 route RS-232 serial port |
Environment features | ? |
Vehicle spark noise immunity | Discharge voltage 10 kV～20 kV, discharge frequency 20 times/s～200 times/s |
Electro-transient pulse noise immunity | 4KV, experiment grade IV |
Static discharge noise immunity | Contacting discharge 6KV, air discharge 8KV, experiment grade III |
Conduction interference limits | Accord with the requirements of class B |
Radiated interference limits | Accord with the requirements of class B |
Temperature characteristic | Working temperature -20 ℃～+60 ℃ Limiting temperature -30 ℃～-20℃, +60℃～+70℃ |
Humidity | 5％～95％? non-condensation? |
- - - -

?

?

Product configurations:

?

1. Standard configurations

1)main device??????? ?? 1 pcs

2)GSM antenna ?????????? 1 pcs

3)GPS antenna ???1 pcs

4)Warranty card

5)Certification

?

2.?Optional configurations

1). Accessories (relay) for cut fuel/circuit

2). Accessories for fuel detecting (floater attenuation cable)

?

?

- - - -
GPS features | ? |
Tracking sensitivity | －159dBm |
Positioning time | Cold boot less than 34s; hot boot less than 3.5s; warm boot less than 33s, re-capture time 1.0s |
Positioning accuracy | 10m2D RMS |
Speed accuracy | 0.1m/s |
BS positioning accuracy | 100m |
GSM/GPRS features | ? |
Frequency | EGSM900/GSM1800 |
Transmitting power | EGSM900: CLASS4(2W), GSM1800:CLASS1(1W) |
GPRS | GPRS multi-slot class8－class 10
GPRS mobile station class B
Downlink speed: max 85.6Kbps
Uplink speed: max 42.8Kbps |
Data storage | ? |
Trace record storage | 50, 000 trace record |
Buffer memory for supplemental report (blind area) | 500 (points) tracking info |
Road detecting storage | Can set 8 roads’ data, each road can be constituted by 1023 broken lines and 256 stations |
Attribute areas storage | Can set 108 rectangle areas (can set 20 polygon areas) |
- - - -

?

?

Product picture:

?









?

?

?

?

Platform Service:

?

?



Working Filed:



?

Certification:

?



?

Factory Information