Industrial Lighting

Aluminium PU Sandwich Panel Production Line,Polyurethane (PU) Panel Production Line Rubber Belt Conveyer Continuous Line

?

Specifications:

?

- - - -
Configurations | Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products receiving N.B: you can choose the Perforation machine and punching part as your demand. |
|
Material | Raw material | colored steel plate, galvanized plate, or aluminum plate |
Thickness | 0.3-0.6 mm (As customer`s need) |
Feeding width | 300mm-1250mm (According to customer`s profile) |
Material hardness: | 550 Mpa---350 Mpa |
Hydraulic Uncoiler (With Coil Car) | Inner Diameter | 500-600mm |
Max Coil width | 1500mm |
Capacity | 10T |
Hydraulic cylinder lift stroke | Up panel 0.5m, Down panel 0.5m |
Coil car stroke | 2.5m |
Pressure of hydraulic system | 6.3Mpa |
Main Forming machine | Forming steps | 24 stations ( Depend on Profiles ) |
Shaft diameter | Φ60mm |
Design type | Middle plate welded |
Transmission | Gear box (Chain and gear box depend on thickness and customer`s need) |
Machine frame | 350# H steel welded; Steel plate welded/ Memorial arch frame type |
Roller material | Gcr15MoV |
Shaft material | 45# steel with tempering |
Cutting blade material | Gcr12MoV quenched |
Working speed | 4-6m/min |
Power of machine | 32KW (According to the thickness) |
Type of cutting | Hydraulic |
Cutting tolerance | ±1mm |
Material of blades | Gcr12 quenched |
Cutter quantity | 1 set |
Working pressure | 20MPA |
Pre-heating Room | Temperature sensor | Hot couple |
Temperature adjustment | Automatic control by temperature control equipment |
Hot air motor | 18.5Kw |
Hot air heater | 200Kw |
Heat type | Heated by electricity and air circulate |
Flying Saw Cutting Machine | Outline dimension of band saw cutting machine | 5500mmx5000mmx 3000mm |
Run speed of band saw | 1000-1500rpm |
Rotate diameter of band saw | 550mm |
Cutting speed of band saw | 50m/min-1000m/min |
Width of band saw | 30mm |
Length of band saw | 3000mm-4000mm |
Transverse move distance | 1500mm |
Cut length on line | 3000mm |
- - - -

?

- - - -
Other Spare part ? | Weight | About 25 ton |
Dimension | 42000mm * 3600mm * 3300mm |
Main body color | As required |
Voltage | 380v/50hz/3ph(or as required) |
Suitable working temperature | About 25℃ |
Spare cutting blade | One piece |
Fuse | 2 pieces |
Relay | 2 pieces |
Travel switch | 2 pieces |
Solenoid valve | 1 pieces |
- - - -

?

?

?

?

?

?

?

?

?

?

?

?

?

Product Features
# Energy saving

You can save air-conditioning and heating expenses remarkably, thanks to its excellent insulation effect as mush as 4. 2 times of cement brick.
# Perfectly insulated and waterproof

Using the high-density EPS, it is moisture and noise free.
# Semi-permanence and easy installation

Using galvanized steel sheets treated with fluorine and silicone on the surface, it is unchangeable and semi-permanent. Due to the standardized products, you can save the cost for construction by hiring the least number of workers and minimizing the period of construction.
# Excellent lightness and firmness

It is light but firm, so even a house is simply built, it is strong enough. Coating with different material, you can enjoy various type of panels.

?

Application

?

The products of this line are widely used as the roof and wall of factory, warehouse, garage,

exhibition center, cinema, theatre, gymnasium, civil construction, stadium, cold storage, etc.

?

Our Advantage
# High Quality
# Reasonable Price
# Good after Service
# 1 Year Warranty
# More Than 20 Years Experience

?

?

Profile Drawing:



Machine Picture:



?