Others

Access Control 110 / 220V Vehicle Barrier Gate Parking Barrier Arm Gate

?

What is the davantages of Wonsun barriers?

?

1. Special driving structure, no gears, non-belt driving,maintenance free, high stability, longer life.

2. Special balancing structure design makes the barrier arm has the feature of slow-starting, fast-running, slow-stopping.

3. It is running without arm-shaking.?

4. The brarrier arm is 90 degrees running which excluding the failure caused 360 degrees running.

5. Special low-speed aluminum housing motor integrated gearbox design, low noise, fast heat-dissipation.

6. The driving mechanism has the desiging of intelligent overheating protection system, in frequent use, it can control the warming of the motor, makes the motor not burned easily.

7. The main engine adopts mechanical limit switch and photoelectric limit switch dual protection, to avoid the problems caused by using traditional magnetic switch which is easily interfered by the external environment.

8. Barrier gae tcan be chosen from 1m to 6m.

?

?
Model Selection and Differences

- - - -
Boom type | Boom Length(L) | Diameter of the spring(mm) | Note |
Straight boom | 6M≥L≥5M | 5.5/4.5 | ? |
? | 5M≥L≥4.5M | 5.5 | Dispatching 4.5 |
? | 4.5M≥L≥3M | 4.5 | Dispatching 4.5 |
Straight boom adhesive tape | 5M≥L≥4M | 4.5M≥L≥3M | 5.5/4.5 | Dispatching 4.5 |
? | 4M≥L≥3M | 3.5M≥L≥3M | 4.5 | Dispatching 4.5 |
Folding boom | 6M≥L≥5M | 6.5/4.5 | ? |
? | 5M≥L≥4M | 5.5/4.5 | ? |
? | 4M≥L≥3M | 4.5 | ? |
? | Two fence boom | 5M≥L≥4M | 6.5/5.5 | ? |
Fence boom | ? | 4M≥L≥3M | 5.5/4.5 | ? |
? | Three fence boom | 4M≥L≥3M | 6.5/5.5 | ? |
? | ? | 3M≥L≥2M | 5.5/4.5 | ? |
- - - -

?

?


Specifications

?

- - - -
Model | DZTP-128-B |
Working Temperature | -40℃～+75℃ |
Voltage | 220V±10%, 110V±10%, 50/60HZ |
Rated power | 80W |
Relative humidity | ≤90% |
Remote control distance | ≥30m |
Net weight | 48kgs |
Speed | 1S,1.8S,3S, 6S |
Max boom length | 6 meters |
Motor Rotational speed | 1400rmp |
Protection Degree | IP54 |
- - - -

?
?
Why choose us?
?
?
1.One year& acute;s free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltae.
3. The surfaces of the system destroyed by wrong installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won& acute;t be notified if there is any.
The explaining ?authority of this product instruction and service article belong to the production factory.
?
?
Communication with customers
?
1)?????Q:?Connected power and press open/close button but traffic barrier gate no action?

- - - -
A | Reason | Solution |
1 | Fuse blown | Check fuse and power in controller |
2 | Battery?of remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
4 | Same frequency interference | Check photocell and loop detector |
- - - -

?
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
?

- - - -
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
2 | Main controller failure | Change a new one |
- - - -

?
3)???Q:?Motor running but traffic barrier gate arm no action?
?

- - - -
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
- - - -

?
4)??Q:?When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?
?

- - - -
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90°?vertical position if the master rod covers slave one; when arm at 180°?horizontal position if master rod and slave one are in the same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90°?vertical and 180°?horizontal position |
- - - -

?
?
?
?