7M Custom Industrial Paint Booth Equipment Riello G20 Burner Heating - BY-3 non standard
7M Custom Industrial Paint Booth Equipment Riello G20 Burner Heating For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale 7M Custom Industrial Paint Booth Equipment Riello G20 Burner Heating, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.7M Custom Industrial Paint Booth Equipment Riello G20 Burner Heating
?
?
Features
?
1, 7.5KW turbo fan for intake, 7.5KW turbo fan for extraction.
2. All panels are tongue and groove interlock structure.
3, #304 stainless steel heat exchanger.
4, All LED lights, energy save and more illumination.
5, Color white, blue, orange and red is optional.
6, OEM available.
?
?
Advantage
?
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating
generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface, hot air recycling until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered?by the air filter.
?
- - - -
Item | Detailed Specification |
Inside dimension | 6900×3900×2650 mm (L×W×H) |
Outside dimension | 7000×5350×3400mm (L×W×H) |
Front door | Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. |
Emergency door | 1 units, 650×1800mm (W×H), colour: white. |
Basement | Galvanized steel assemble, 300mm high, quadrate steel support, full grilles made by flat bar and twisted steel, 2 ramps, 750×2000mm/pc, silver colour. |
Wall panel | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white. |
Light | Ceiling Lights: 8Units×4Pcs=32Pcs×18W, side lights: 8Units×2Pcs=16Pcs×18W, with LED, lighting boxes are powered coated, illumination ≥1000LUX |
Generator cabinet | Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside. |
Intake and Exhaust system | Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. |
Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 4m ducts, 1 pcs 900 bend, 1 pcs 300 bend. |
Heating system | Italy RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend. |
Purification system | Pre-filter, ceiling filter, fibreglass filter, activated carbon filter. |
Roof | Galvanized steel |
Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start. |
Total power | 17.5KW (Power supply 1×220V, 3×380V, 50HZ) |
- - - -
?
?
?
Guangzhou Baoyue Electromechanical Equipment Co.ltd
Address: No. 6-8, North Bicun Road, Xinhua Industrial Zone, Guangzhou, Guangdong, China, 510000
Tel: 86-20-66806679
Guangzhou Baoyue Electromechanical Equipment Co.,Ltd located at Huadu district of Guangzhou,where is modern car industry production park,have convenient transport facilities.The area for working and manufacturing more than 19,000銕?
聽
The company specilize in the design, manufacture and sal