Sulfur & Phosphor Mineral

?
66kv Substation Composite Suspension Insulator Long Rod With One Corona Ring?
?
?
Specifications:
?
Dimensions and Characteristics of 66kV?composite suspension insulator

- - - -
Figure. No | Model | Rated Voltage | Specified Mechanical Load | Coupling Size | Section Length | Minimum Creepage | Full-Wave Impulse Withstand Voltage (Peak) | 1 Min Wet Power Frequency Withstand Voltage | Weight (for Reference) |
? | ? | ?kV | ?kN | ? | Hmm | Lmm | ≥kV | ≥kV | ?kg |
1.11-1 | FXBW-66/70-940 | 66 | 70 | 16 | 940±15 | 2200 | 410 | 185 | 3.7 |
1.11-1 | FXBW-66/100-940 | 66 | 100 | 16 | 940±15 | 2200 | 410 | 185 | 3.7 |
1.11-1 | FXBW-66/120-940 | 66 | 120 | 16 | 940±15 | 2200 | 410 | 185 | 3.7 |
1.11-1 | FXBW-66/70-870-A | 66 | 70 | 16 | 870±15 | 1920 | 410 | 185 | 3.3 |
1.11-1 | FXBW-66/100-870-A | 66 | 100 | 16 | 870±15 | 1920 | 410 | 185 | 3.3 |
1.11-1 | FXBW-66/120-870-A | 66 | 120 | 16 | 870±15 | 1920 | 410 | 185 | 3.3 |
1.11-2 | FXBW-66/70-870-B | 66 | 70 | 16 | 870±15 | 2000 | 410 | 185 | 3.6 |
1.11-2 | FXBW-66/100-870-B | 66 | 100 | 16 | 870±15 | 2000 | 410 | 185 | 3.6 |
1.11-2 | FXBW-66/120-870-B | 66 | 120 | 16 | 870±15 | 2000 | 410 | 185 | 3.6 |
1.11-3 | FXBW-66/120-1066-YS | 66 | 80 | 16 | 1066±15 | 2800 | 410 | 185 | 4.5 |
- - - -

?


Description:
?
1, 66kV suspension tension insulators are widely used in overhead transmission lines and substations
?
2, Dead end fittings are up to the requirements from the clients, usually we use ball, socket, tongue, clevis for suspension insulators with forged steel or cast steel. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.
?
3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.
?
4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.
?
5, All our insulators were type tested and design tested in accordance with IEC61109, maximum RIV is 100μV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.
?
6, All the 66kV suspension or tension insulators are designed with one corona rings
?
Applications:
?
1, 66kV overhead transmission power lines.
?
2, 66kV substations
?
Features/ advantages :
1. Good performance of hydrophobility
2. Anti-pollution
3. High mechanical strength
4. Small volume
5. Light weight
6. Can replace the porcelain ones because of the good anti pollution, convenient installation
? ?and free from maintainance performance.
?
Our services
1. We offer the best solution and products to fulfill the buyers& acute; requirements.
2. We can arrange technicians to install the equipments and train your staff on site.
3. Anytime, we provide considerate technical consultation.
4. Prompt reply for your inquiry and feedback.
5, OEM service is also available with us.
?