Passive Components

Automatic High speed Cold Horizontal Heading Machine for screw and bolt??

?

Specifications:

?

- - - -
Type No. | Product length | Product diameter | Slider | Productivity (Pcs/min) | Motor power(kw) | Weight (kg) | Dimension |
Z12-4 | 3-55 | 2-5 | 80 | 100 | 2.2 | 1200 | 1800*1000*1400 |
Z12-6 | 5-100 | 4-8 | 120 | 90 | 4 | 4000 | 2500*1500*1300 |
Z12-8 | 10-150 | 6-10 | 160 | 80 | 5.5 | 4500 | 3300*1700*1600 |
Z12-10 | 15-160 | 8-12 | 190 | 60 | 7.5 | 6500 | 3600*1800*1600 |
Z12-12 | 20-160 | 8-16 | 220 | 50 | 15 | 12000 | 3800*2000*1700 |
Z12-16 | 25-250 | 10-18 | 270 | 45 | 18.5 | 15000 | 4200*2600*1800 |
Z12-20 | 30-250 | 12-22 | 300 | 40 | 22 | 22000 | 5000*2800*1900 |
Z12-20 | 30-300 | 12-22 | 380 | 40 | 30 | 28000 | 5200*2800*1950 |
Z12-24 | 35-300 | 12-26 | 380 | 36 | 37 | 40000 | 5400*3000*2000 |
Z12-30 | 50-300 | 16-32 | 380 | 36 | 55 | 65000 | 5600*3100*2200 |
- - - -
?
?Apply and Features:

?

(1) Perfect design,easy operation.
(2) Single rail skidway design make the machine runs in high speed,and the production efficiency is also high.
(3) Major installation kit of our machines are made from high quality material, undergoing high abrasion-resistance and low deformation heat treatment process,the machine is endurable with long time preciseness
(4) Our machines adopt the forced oil feeding system,to make sure all components of the machine run in films of oil condition,and the machine could be durable for long time.
(5) The key components of our machines are imported from Taiwan,Japan and Germany,which are all complied with the all high- precision,high-hardness,high-abrasion resistant requirments.
(6) Male mould ejection design,which solve the screws blocking problem when running down.
? The machine functions and features: ? ? The machine makes with pole bits(coil bits) blanks for rivet,screw, woden screw and bolt ,etc. All the procedure of this machine is automatic, including cutting of pole bits (coil bits),transmission?of blanks, top force of rivets or bolt tops. And promotion of finished workpieces. ? The Application Rulls of the machine: ? ? 1. Checking the machine before running ????? (1) Keep some space between Ram Slide and cutting board ,generally keep 0.05mm with? guide board at its side and 0.10mm with guide board above it. ????? (2) For flexible running of all mechanisms without bumping. ????? (3) Feeding mechanism can assure to reach length of needed blanks and carry the cut-blank to punching line. But must switch off feeding mechanism before running ot the machine. ???? (4) All lubrication points must be filled with lubriacant. ?2. Checking the Working Machine ???? (1) Pay Attention to abnormal noise of the machine and stop the machine at any doubt. ???? (2) Switch off the fedding mechanism before stopping running to stop its running,after that can swith off power. ??? (3) Replace worn screws in time and the cutting tool, should not be used when becoming blunt. ??? (4) All friction surface must be lubricated in time to ensure precsion and longevity of the lathe. ? Machine packages : ? ???? Standard export wooden case and put into the container------The small size machine ???? Standard export trap and put into the open-top container??------The big size machine ? ?
?

?

Customers and us :

?

?? We have exported so many ountries, such as,South Africa, Russia, Iran,Egypt, India, North Korea, South Korea, Yemen, Vietna-m, Bengal. Hope you will our next friends and customers.

?

??

?