4K X 2K HDMI Extender Over Cat5e 100m 1080P POE Function With HDBaseT - D - E100
4K X 2K HDMI Extender Over Cat5e 100m 1080P POE Function With HDBaseT For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale 4K X 2K HDMI Extender Over Cat5e 100m 1080P POE Function With HDBaseT, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
HDMI Signal Extender over 100m support POE function with HDBaset
?
Introduction :
?
The cat5e / cat6 HDMI Extender is a tool which can extend your HDMI signal over 328fts / 100meters to a compatible display . It is designed to convert HDMI signal to standard HD BaseT signal which can be transmitted by Internet cable . It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal , so you can control the Source in the Sink side which is 328fts outside , also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender .
?
Features :
# # ?POE ( Power Over Ethernet ) function is supported , either TX or RX is powered by24V @ 1A power supply , another does not need power from the DC jack . POE Power consumption is less than 10W . -? See the description 1
# ?Use single UTP LAN cable ( CAT - 5E / 6 ) to substitute HDMI cable to achieve long distance transmission .
# ?UTP cable termination follows the standard of IEEE - 568B .
# Transmission distance : ?※ Over CAT6 cable?100 meters : 1080P @ 60Hz36bit ; 3D1080P @ 30Hz36bit ;?70 meters : 1080P @ 60Hz @ 48bit ; 1080P @ 120Hz @ 24bit ; ?3D1080P @ 60Hz @ 36bit ; 4K x 2K @ 30Hz @ 24bit.
# Support display resolutions up to 4K x 2K @ 30Hz
# Full HD support : 1080p @ 60Hz @ 48 bit / pixels , 1080p @ 120Hz @ 24 bit / pixels , 3D 1080P60Hz and 4K x 2K @ 30Hz @ 24bit .
# Transfer Bidirectional Infrared control signal together with the HDMI signal .?- See the description 2?.
Specifications?
?
- - - -
# Frequency Bandwidth | # 297MHz ?[ 10.2Gbps ] |
# Transmitter Input / Output Ports | # 1 x HDMI Female port / 1 x CAT6 |
# 1 x IR Tx / 1 x IR Rx |
# Receiver Input / Output Ports | # 1 x HDMI Female port / 1 x CAT6 |
# 1x IR Tx / 1 x IR Rx |
# Power Supply | # DC 24V 1A |
# ESD Protection | # ± 8kV ( air - gap discharge ) |
# Human Body Model : | # ± 4kV ( contact discharge ) |
# Dimensions ( mm ) | # 65 ( W ) X 100 ( D ) X 25 ( H ) |
# ?Weight | # 200g x 2 |
# Operating Temperature | # 0°C ~ 40°C / 32°F ~ 104°F |
# Storage Temperature | # - 20°C ~ 60°C / -4°F ~ 140°F |
# Relative Humidity | # 20 ~ 90% RH ( Non - condensing ) |
# Power Consumption ( Max ) | # 10W |
- - - -
?
Package Contents
?
- - - -
# HDMI Extender Transmitter | # 1PCS |
# HDMI Extender Receiver | # 1PCS |
# Wideband IR Tx | # 2PCS |
# Wideband IR Rx | # 2PCS |
# 24V1A DC Power Supply | # 1PCS |
# Operation Manual | # 1PCS |
# Mounting ears | # 4PCS |
- - - -
?
Operation controls and Functions
Transmitter
?
1 . DC IN : Plug the 24V DC power supply into the unit .
2 . IR OUT : Channel 1 IR Transmitter. Connect with Wideband IR Tx .
3 . IR IN : Channel 2 IR Receiver. Connect with Wideband IR Rx .
4 . HDMI IN : HDMI input port . This slot is where you connect the HDMI source .
5 . HD BaseT OUT : Standard HD BaseT signal output port . Connect HD BaseT receiver with a UTP cable following the standard of IEEE - 568B .
6 . LINK LED : The connection status indicating lamp .
# Illuminate : The Transmitter and Receiver are in good connections
# Flashing : The Transmitter and Receiver are in poor connections
# Dark : The Transmitter and Receiver are in no connections
Receiver
?
1 . DC IN : Plug the 24V DC power supply into the unit .
2 .?IR IN : Channel 1 IR Receiver . Connect with Wideband IR Rx .
3 . IR OUT : Channel 2 IR Transmitter . Connect with Wideband IR Tx .
4 . HDMI OUT : HDMI output port . This slot is where you connect the HDTV or monitor with HDMI cable .
5 . HD BaseT IN : Standard HD BaseT signal input port . Connect HD BaseT transmitter with a UTP cable following the standard of IEEE - 568B .
6 . LINK LED : The connection status indicating lamp .
# Illuminate : The Transmitter and Receiver are in good connections
# Flashing : The Transmitter and Receiver are in poor connections
# Dark : The Transmitter and Receiver are in no connections
Description 1
?
POE(Power Over Ethernet) Application Example
?
Description 2
?
Bidirectional Infrared control Application Example
?
?
Application Example
?
SZ DODONET TECHNOLOGY CO.,LTD
Address: 3rd floor ,Xinbaoyi electronic park ,Houting the third tech park ,Shajing town,Bao'an district ,Shenzhen ,China, Shenzhen, Guangdong, China, 518000
Tel: 86-137-14429421
The company was founded in 2010 and located in Shenzhen China,Shenzhen DODONET Technology CO., Ltd. Is a professional manufactory of all kinds of AV conversion and extension products.
Related Products
