Industrial Supplies Projects

?

48 Inch Steel Cord Conveyor Belt Splicing Equipment High Performance

?

?

Production Application

?

Our rubber belt vulcanizer and splicing tools are mainly applied to industries for splicing and repairing for

?

conveyor belting such as metallurgy, mine, power plant, port, dock, construction material cement,

?

chemical industry ,tobacco ,and food automatic line field.

?

?

Technical Parameters

?

1. Model: CZ-CMX/DM HE1W13456;

?

2. Suitable for belt type: Common rubber conveyor belt and steel cord conveyor belt

?

3.?Belt Width: 1200mm/42-47 inches;

?

4.?Voltage: 220V 380V 415V 660V 50HZ(Other voltages are also available);

?

5. Temperature adjustment range: 0~200°c;

?

6. Temperature raise (from normal temperature to 145℃) : no more than 25 minutes;

?

7. The temperature difference of heating plate working surface: ±2°c;

?

8. Time of heat preservation: Usually 30mins;

?

9.?Water cooling time:15 minutes (from 145 degrees down to 70 degrees or less);

?

10.?Vulcanizing pressure: 0.8~1.8 MPa;

?

11.?Degree of heating plate: 20°(rectangle other bias angle is also available)

?

?

When order?(please supply below information, our engineer will make a solution for you)

?

1. Max belt width

?

2. Heating platen length (or please supply belt manufacturer’s recommended splice length)

?

3. What kind of belt, light duty belts or heavy duty belts

?

4. Working Voltage

?

5. Pressure requirements

?

6. Degree of heating platen (standard will be 20 degree)

?

?

Specification

?

- - - -
Model | Belt Width | Platen Size(20?) | Splice Length | Qt. Bolts |
A | B | 100PSI (0.7MPa) | 200PSI (1.4MPa) |
in | mm | in | mm | in | mm | in | mm | sets |
CZ-CMX/DM HE1W13431 | 24-25 | 650 | 34 | 880 | 31 | 800 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14131 | 24-25 | 650 | 41 | 1060 | 31 | 800 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13439 | 30-31 | 800 | 34 | 880 | 39 | 995 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14139 | 30-31 | 800 | 41 | 1060 | 39 | 995 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13448 | 36-39 | 1000 | 34 | 880 | 48 | 1228 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14148 | 36-39 | 1000 | 41 | 1060 | 48 | 1228 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13456 | 42-47 | 1200 | 34 | 880 | 56 | 1430 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14156 | 42-47 | 1200 | 41 | 1060 | 56 | 1430 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13458 | 48-51 | 1300 | 34 | 880 | 58 | 1490 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14158 | 48-51 | 1300 | 41 | 1060 | 58 | 1490 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13465 | 54-55 | 1400 | 34 | 880 | 65 | 1650 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14165 | 54-55 | 1400 | 41 | 1060 | 65 | 1650 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13467 | 59-60 | 1500 | 34 | 880 | 67 | 1700 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14167 | 59-60 | 1500 | 41 | 1060 | 67 | 1700 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13473 | 61-63 | 1600 | 34 | 880 | 73 | 1867 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14173 | 61-63 | 1600 | 41 | 1060 | 73 | 1867 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13482 | 70-72 | 1800 | 34 | 880 | 82 | 2080 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14182 | 70-72 | 1800 | 41 | 1060 | 82 | 2080 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13490 | 78-80 | 2000 | 34 | 880 | 90 | 2300 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14190 | 78-80 | 2000 | 41 | 1060 | 90 | 2300 | 35 | 910 | 10 | 12 |
CZ-CMX/DM HE1W13497 | 84-86 | 2200 | 34 | 880 | 97 | 2480 | 28 | 730 | 8 | 10 |
CZ-CMX/DM HE1W14197 | 84-86 | 2200 | 41 | 1060 | 97 | 2480 | 35 | 910 | 10 | 12 |
- - - -


Components and Advantages

?

- - - -
CZ-CMX/DM HE1W13456 conveyor belt splicing machine main components |
Name | Quantity | Remarks |
Heating Plate | 2 pieces | Heating Platen Size(L*W):880*1430mm |
Water Pressure plate | 1 piece | 　 |
Heat insulation board | 2 pieces | On the insulation board piece, lower heat insulating plate with a water plate integration |
CZ-CMX temperature controller box | 1 set | CZ-CMX control box has the new structure, you can put circle the electrical lines on it, prevent the wires lost. |
Cross beams(mm) | 8 pieces | 　 |
Clamp bolt,nut,gasket | 8 pieces | 　 |
Ratchet wrench | 2 handles | 　 |
Primary wire/cable with plugs | 1 piece | 　 |
Secondary wire/cable with plugs | 2 pieces | 　 |
CMX-8*20 Electrical Pump | 1 set | 　 |
High pressure pipe | 1 piece | With the fast joint |
Rapid water cooling function | Yes | 　 |
The clamping device | 1 set | 　 |
Certificate, packing list (in English) | 1Copy | 　 |
Vulcanizing machine manual (in English) | 1Copy | 　 |
Belt vulcanizing machine bonding process of DVD(in English) | 1Copy | 　 |
- - - -

?

?

FAQ

?

?

01)Q: Do you have any certificates for the vulcanizing machine?


A: We have CE Certificate and ISO9001:2008 for the machine.


02) Q: Normal delivery time?


A: About 15 working days. Customized machines will take a bit longer.


03) Q: Will you test the machine before shipping?


A: Yes, each machine, we will install and test before shipping.


04)Q: What after-sales service will you supply?


A: If the problems arising from the our manufacturing defects in the guarantee period, we will provide full

?

? ? support to?solve the problem, reducing the loss. At the same time, we will provide the free spare parts;

?

? ? Over the guarantee period,if you want to replace the accessory, we can give some discount on the ?

?

? ? price.


05) Q: Whether can visit your workshop to see how to process the machine?


A: No problems, you are always welcomed to visit us.


06) Q:?Can I be your agent in our area?


A: Yes. ComiX is looking for the agents all over the world. If you are interested , please feel free to contact

?

? ? ?us to?negotiate the agency mattes in details.

?

07) Q:?How to get more informaition?

?

?A: Please visit?www.comixvulcanizing.com or?www.comixvulcanizer.com?