Electronics Agents

?

?

3U 9W T3 Compact Fluorescent Lamps Energy Efficiency Grade A 2700K - 6400K

?

?

Description

?

1 . Guarantee is for 2 years .

2?. Passing the EMC test .

3?. For the pack , we have color box , single blister , double blister .

4?. No flicker , No noise , No electromagnetic interference ( EMI ) .

5 . Using nickleplated aluminum base , very good to avoid getting rusted .

6?. Easy to apply , can change traditional incandescent bulbs directly , the ballast in integrated in to the lamp .

?

Lamp parameters

?

- - - -
Tube Parameter for CFL | Type | 3U |
Tube Diameter | ?Φ 9mm |
Wideth | ?/ |
Length | 75mm |
Circle | ?/ ? |
Color Rendering Index | ?> 80 Ra |
SDCM | ?< 5 |
Color Temparature | 2700K - 6400K |
Luminous Efficency | ?> 55lm / w |
2000h Luminous Depreciation | ?< 15% |
Responsive Time | ?< 0.5s |
Turn on off time | ?> 10 000 times |
Luminous Decay | Less than 15% at 2000hrs |
Powder | 100% A - gradeTriphosphor |
Electronic Parameter for CFL | Power | 9W |
Power Factor | ?> 0.5 |
Working Voltage | 110V - 127V / 185 - 265V |
Transister / Capacitor | Huajing / Aishi |
Base | Size | E27 |
Materials | Nickelplated Aluminum |
Type | Soldering |
Plastic cover | Wideth | 42mm |
Materials | PBT |
No middle cover |
Operating Temp. | ?-?30 ℃ to + 40 ℃ |
Life Time | ?> 8000H |
Time need to be stable | 3 Mins |
Lumen | ?> 450 LM |
- - - -

?

Features

?

1 . Power : 9W

2 . P.F. : > 0.5

3 . Power consumption: < 10%

4?. Compact type , integrate the ballast in the lamp

5?. 100% triphosphor A - grade powder

??????1 ) Luminous efficency: > 60 lm /w

??????2 ) Brightness maintance: > 80% after 2000H

??????3 ) CRI : > 80 Ra

??????4 ) SDCM : < 5

?

Competitive advantage

?

1 . Strict raw materials inspection .

2?. In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

3?. we are testing every lamp before packed in the cartons .

?

Application

?

Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .

?

Quality Control ( QC )

?

1 . We have 4 QCs to check the raw Materials , such as tube , Transister , Electrolytic . capacitor , inductor , resister , diode , magnet ring , capacitor , PCB board , plastic cover .

2 . Before the mass production , our Technicians will tune the technical parameters of each items to make sure the Wattage , P.F. living up to the requirement of customer,and also will do the High temperature and high voltage test ( llight it in the oven ) , doing the destructive test , and also will do the turn on off test , to make sure the life time of the lamp , also do the start tets in low temperature and low voltage ( light in the fridge ) .

3 . In the mass production , our QC will take selective examination on every step , such as Plug - in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

5 . In the warehouse , our QC will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

6 . After laoding the container , we will trace the life time of ech order , we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

?

?

?