Power Transmission Equipment

?
?
380V Vertical Feed Wood Pellet Making Equipment For Fertilizer Plant
?
1) vertical ring die pellet machine introduction
?
The vertical ring die pellet machine is suitable for the materials with low adhesive and formation rate, which are difficult to pressing and molding, such as rice husk, sunflower seed husk, peanut hull, a variety of wood waste, like branch, trunk, bark, various of crop straw, eucalyptus, palm fiber (EFB), coffee shell, sawdust and so on.?
This machine is widely used for the recycling of wastes and tailing in biomass fuel plant, power plant, wood processing plant, fertilizer plant, chemical factory, foodstuffs factory and brewery.
?
2) vertical ring die pellet machine?Features
?
Vertical feed and directly in place;
Die static, the roller rotating, and materials centrifugal, evenly around;
Double layers die, down & up dual usage, low input, cost efficiency and energy saving;
Ring die, vertical structure, granulating chamber cooling;
Separate discharge device to ensure the forming rate of pellets, reasonable design;
Main parts adopt high alloy wearable materials, and doubled lifetime;
24 hours working with automatic lubrication system.
?
3) vertical ring die pellet machineTechnical?Data
?

- - - -
Model | Power?(kw) | Pellet?size?(mm) | Inner?diameter?(mm) | Production?(t/h) | Dimension?(mm) | Weight?(t) |
STY?450 | 55 | 4-12 | 450 | 0.3-1 | 2200*900*1600 | 3 |
STK?550 | 75 | 4-12 | 550 | 0.7-1 | 2300*1000*1780 | 5 |
STK?560 | 90 | 4-12 | 560 | 1-1.5 | 2600*1300*2300 | 6.3 |
STK?680 | 160 | 4-12 | 680 | 2-2.5 | 3200*1400*2400 | 8.5 |
STK?850 | 220 | 4-12 | 850 | 2-3 | 3750*1650*3250 | 12.6 |
STK?880 | 315 | 4-12 | 880 | 3-4 | 4300*1900*3600 | 14.5 |
- - - -

?
4) Characteristics of ?ring die wood pellet mill
?
1) Vertical feeding directly in place.
2) Die static, roller rotating, materials centrifugal, evenly distributed around.
3) Double layer dies, up and down dual use, reduce the cost,enhance the efficiency, can be dual use.
4) One die, different hole diameters, with different specifications to pellet.
5) Macro porous die, wire joining circular tube, increasing travel, improving density.
6) Ring die, vertical structure, good for cooling the pelletizing room.
7) Independent and frequenter conversion discharge device, to ensure that the rate of pellet production.
?
?
5) Four differences of ring die wood pellet mill
?
1) Upward mold, special structure, vertically feeding and easier heat dispassion.
2) Die static, roller rotating, material centrifugal and distribute around evenly.
3) Double layer die, mufti function, high efficiency.
4) Macro-porous die, wire joining circular tube, increasing travel, improving density.
?