3800 MPa Sintering Tungsten Carbide Rod / Bar 10% Cobalt , Density 14.37 g / cm3 - AIA-1
3800 MPa Sintering Tungsten Carbide Rod / Bar 10% Cobalt , Density 14.37 g / cm3 For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale 3800 MPa Sintering Tungsten Carbide Rod / Bar 10% Cobalt , Density 14.37 g / cm3, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
3800 MPa Tungsten Carbide Rod / Bar 330 mm with 10% Cobalt, Density 14.37 g / cm3
?
?
Description:
?
Tungsten carbide rod can offer best-fit solutions for special work piece metals such as harden material with high wear resistance. HF30 Tungsten carbide rod is a WC-Co alloy, Co content 10%, made up by 0.6um sub-micron grain.
?
Sinter - HIP technology, which is simultaneous application of heat and pressure, fully consolidates the microstructure?during the sintering process. We adopt automatical temperature control system and advanced sintering technology to reduce the probability of porosities, which efficient increase the mechanical property of rod blank.
?
Our Carbide rods product quality is stable and reliable, which have a good shock resistance, abrasion resistant and bending resistance in use.?
?
- ISO Grade: K30 - K40
?
-?with?90%?tungsten?carbide, 10%?cobalt?
?
-?Made?of?0.6?micron?ultrafine?TC?powder
?
-?Hardness:?92-92.3?HRA
?
-?Bending?strength:?≥3800
?
-?Density:?14.37?g/cm3
?
-?As?sintered
????????????????????????????????????????????
-?Standard?length: 330?mm long bar
?
?
Specification:
?
?
Solid rods (Metric):
?
- - - -
D | Tolerance of Diameter (mm) | Length | D | Tolerance of Diameter (mm) | Length |
mm | mm | mm | mm |
3.0 | +0.2/+0.4 | 330 | 10.0 | +0.2/+0.4 | 330 |
4.0 | +0.2/+0.4 | 330 | 12.0 | +0.2/+0.4 | 330 |
5.0 | +0.2/+0.4 | 330 | 14.0 | +0.2/+0.4 | 330 |
6.0 | +0.2/+0.4 | 330 | 16.0 | +0.2/+0.4 | 330 |
7.0 | +0.2/+0.4 | 330 | 18.0 | +0.2/+0.4 | 330 |
8.0 | +0.2/+0.4 | 330 | 20.0 | +0.2/+0.4 | 330 |
- - - -
?
?
Application:
?
- - - -
Jinlei?Grade | ISO?Grade | The?recommended?tools | Description |
HF30 | K30?- K40 | Solid?carbide?drills Solid?carbide?end?mills | With 10% cobalt and 90% tungsten carbide.?Superior advantages where high toughness and sharp edge profiles are needed. Outstanding performance over a wide range of tool and workpiece types. |
Application | ??Low?cutting?speeds,?high?feed?rates?and?interrupted?cutting ??Multi?purposes?grade?for?endmills,?drills,?routers?and?burrs ??Machining?of?steels,?cast?iron,?stainless?and?heat?resistant?steels ??Machining?of?nickel-based?and?titanium?aerospace?alloys |
- - - -
?
?
Competitive Advantage:
?
Compared to high speed steel, tungsten carbide consists of natural hard and stable phase, and practically doesn’t lose any level of its high hardness when heating up. However, the high hardness of HSS is only in a result of quenching process during which hard phase nucleates & grows. It breaks down easily when annealing. Therefore, carbide tools last significantly longer than HSS. And?carbide tools ont only?allow?for faster machining?but withstand higher temperatures than standard high speed steel tools.
??
Jiangsu Hetian Technological Material Co., Ltd.
Address: No.295, Qianluo Village, Dingshu Town, Yixing City, Jiangsu Province, China, Wuxi, Jiangsu, China, 214000
Tel: 86-510-87490565
Jiangsu Hetian Technological Materials Co., Ltd. is founded in 2003 and located in southeast of China, Yixing City, near Shanghai. We are the professional manufacturer of tungsten powder, tungsten carbide powder, and its related products, including tungsten carbide rods, balls, anvils, plates and high gravity alloy tungsten cube. Among those value added products, what we mainly focus on is tungsten carbide rods, anvils and cubes.
To assist with productions above, we built up our own hydrogen fabrication base for reduction reaction during the process of making tungsten powder and graphite container manufacturing center for all containers we need to use during powder or carbide rods sintering.Our company has more than 100 employees, with 5 senior engineers and 30 junior engineers. Co-operating with Central South University and Chinese Academy of Sciences, to a great extent, supports and promotes our developing & research ability. More profound understanding and techniques about cemented carbide are promoted all the time. To facilitate our customer, Hetian Tech HQ also set two sales points separately in Shenzhen, Guangdong Province and Weihai, Shangdong Province. More customers鈥?need or feedback can be solved in time.
Hetian Tech Material Company pays high attention to technology innovation. It is the National High-Tech Enterprise and has 6 utility model patents, with one accepted inventive patent. It has also passed GLB 9001B-2009 standard, ISO 9001:2000, and ISO 9001:2008 quality management system certifications. We are a council member of Cemented Carbide Branch, China Tungsten Association. Besides, our brand "Jinlei" is listed in "Famous Brand Products of Wuxi City".
Our company believes and insists in "People Oriented, Technology Innovated, Quality First and Honesty Foremost". Welcome to visit Jiangsu Hetian and we hope to cooperate with you.
